A10-1310VP — Norcold long-louver screens

Screen size: 19.6 × 1.3 in. Pack: 3 screens. Matching Norcold louvers approximately 19¾ inches long.
View A10-1310VPRV refrigerator exterior vents must allow air to circulate around the refrigerator's cooling system. Insects can enter through the louvered openings, so Valterra makes stainless-steel mesh screens that fit inside specific vent-cover patterns. These three kits differ in louver length, number of screens and refrigerator vent style; choosing by the refrigerator brand alone is not enough.
| Valterra MPN | Matching louver pattern | Screen size | Qty. |
|---|---|---|---|
| A10-1310VP | Matching Norcold louvers approximately 19¾ inches long | 19.6 × 1.3 in | 3 |
| A10-1312VP | Matching Norcold louvers approximately 27½ inches long | 27.5 × 1.3 in | 3 |
| A10-1313VP | Matching Dometic vent covers with six short louvers | 8.1 × 1.5 in | 6 |
A10-1310VP contains three screens measuring 19.6 × 1.3 inches for matching Norcold refrigerator vent louvers. A10-1312VP also contains three screens, but each is much longer at 27.5 × 1.3 inches. They are not interchangeable based on refrigerator brand or package count. A10-1313VP is a six-pack of smaller 8.1 × 1.5-inch screens for matching short-louver Dometic exterior vent covers.
Measure the actual opening in the installed exterior vent cover, including its length, height and number of louvers. A replacement vent cover may differ from the original refrigerator installation, so the cover in front of you is the most useful starting point.

Screen size: 19.6 × 1.3 in. Pack: 3 screens. Matching Norcold louvers approximately 19¾ inches long.
View A10-1310VP
Screen size: 27.5 × 1.3 in. Pack: 3 screens. Matching Norcold louvers approximately 27½ inches long.
View A10-1312VP
Screen size: 8.1 × 1.5 in. Pack: 6 screens. Matching Dometic vent covers with six short louvers.
View A10-1313VPIts existing louvers provide the air path for the refrigerator installation.
A correctly sized screen covers each matching opening to deter nesting insects.
Secure the screen to appropriate louver locations according to the kit instructions.
Keep the mesh clear so the refrigerator can ventilate properly.
This parts reference identifies the components rather than depicting a manufacturer-specific refrigerator ventilation diagram. These screens are not replacement covers, roof vents or cooling-system components.
For other appliances, our Valterra furnace vent-screen comparison identifies round and rectangular furnace outlets, while the water-heater vent-screen guide covers Atwood and Suburban heater doors. Those screens are not substitutes for refrigerator louver screens.
Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.
Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.
Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.
Nos produits