Valterra Mighty Cord 90° RV Shore-Power Adapters: 15A, 30A & 50A

Valterra Mighty Cord 90-degree detachable adapters connect a power source to an RV with a compatible locking power inlet. The straight-blade male plug faces the power supply, while the 90-degree female locking connector attaches at the RV. Each adapter below has a 12-inch cord, but its two ends are not necessarily rated for the same amperage.

Choose by both connector ends

Valterra's full manufacturer catalog numbers begin with A10-; the linked store listings may show the shorter number without that prefix. The ending model digits distinguish these four connector combinations.

What the angled connector changes

The 90-degree female connector helps redirect the cord away from the RV inlet instead of leaving it extending straight out. These detachable styles use a locking receptacle and a retaining ring for a compatible RV inlet; Valterra also describes LED power-continuity indicators on the series. Check the physical inlet pattern and the lock-ring arrangement before ordering.

Match the supply, not just the RV's rating

A 15A-to-30A or 30A-to-50A adapter does not turn a lower-amperage electrical supply into a higher-amperage one. Electrical use remains subject to the source circuit's limits, the condition of the connections and the RV's electrical requirements. Confirm the campground or supply receptacle type, RV inlet style, proper grounding and protective equipment. Do not use an adapter to bypass required electrical protection.

Product photographs and links

15A male → 30A locking female

For a suitable 15-amp supply and compatible 30-amp locking RV inlet.

View A10-1530D90VP product

30A male → 30A locking female

Keeps the same 30-amp rating while changing to a compatible angled locking inlet connection.

View A10-3030D90VP product

30A male → 50A locking female

Connects a compatible 50-amp locking RV inlet to the matching 30-amp power source; available current remains limited by the supply.

View A10-3050D90VP product

50A male → 50A locking female

A short 50-amp adapter with a 90-degree locking female connection for the matching RV inlet.

View A10-5050D90VP product

Quick identification checks

1. Read the amperage and blade arrangement on the supply receptacle; match the adapter's male end.
2. Read the RV inlet rating and check the female twist-lock pattern and ring arrangement.
3. Check whether an angled connection provides sufficient clearance around the inlet housing.
4. Follow the RV and power-equipment manufacturer's instructions for electrical loading and outdoor connections.

See Valterra's 90-degree detachable adapter family and the model listings for 15A–30A, 30A–50A and 50A–50A.