Taylor Made 1632
11 in windshield support bar
Anodized aluminum with pivoting nylon fittings. Sold as one support bar.
View matching support barTaylor Made Boat Windshield Support Bars: 11, 12 and 14-Inch
Taylor Made Boat Windshield Support Bars: 11, 12 and 14-Inch Lengths
Walk-through boat windshields may use an adjustable-angle support bar between the frame and the boat. Taylor Made offers different fixed-length bars with pivoting end fittings. These three part numbers are distinguished by length, so check the original support and its mounting points before choosing a replacement.
Identify the correct support bar
Measure the installed support
Compare the original overall support length with the manufacturer's specified bar size. Record the end-to-end mounting geometry rather than guessing from boat model alone.
Inspect end fittings
The anodized aluminum versions use nylon fittings that pivot to accommodate different mounting angles. Confirm the existing fastening arrangement.
Check the mounting surface
Inspect the windshield frame, base attachment and fastener condition. A new bar will not correct cracked or loose mounting points.
Replacement guidance: Taylor Made lists the support bars individually. If a boat uses two supports, confirm whether one or both need replacement. The manufacturer's published length alone does not establish fitment to every windshield.
Taylor Made support bar part number chart
| Manufacturer part | Listed length | Construction | Package |
|---|---|---|---|
| 1632 | 11 in | Anodized aluminum tube; pivoting nylon fittings | 1 bar |
| 1634 | 12 in | Anodized aluminum tube; pivoting nylon fittings | 1 bar |
| 1638 | 14 in | Anodized aluminum tube; pivoting nylon fittings | 1 bar |
Part 1632 measures 11 inches, 1634 measures 12 inches, and 1638 measures 14 inches in Taylor Made's published size chart. These are distinct replacement lengths, even though the anodized construction and end-fitting family are similar.
What the support does
The bar helps brace a walk-through windshield and maintain its installed position. Pivoting ends allow the fittings to follow the angle of the mounting surfaces. Match the original mechanical arrangement and check for sufficient movement and clearance when the walk-through panel opens or closes.
For this product family, Taylor Made uses lightweight anodized aluminum tubing with nylon ends. Other support-bar models in the manufacturer's range may have different finishes or end-foot construction; do not assume they use identical fittings.
Find the exact Taylor Made replacement
Taylor Made 1634
12 in windshield support bar
Anodized aluminum with pivoting nylon fittings. Sold as one support bar.
View matching support bar
Taylor Made 1638
14 in windshield support bar
Anodized aluminum with pivoting nylon fittings. Sold as one support bar.
View matching support barBefore installation
Support the windshield safely while changing the brace. Compare the old and new bars side by side, and use the correct mounting hardware and existing attachment points where appropriate. Avoid drilling through tempered glass or overstressing the windshield frame. If the original bracket mounting is damaged, repair that problem before installing the new support.
Frequently asked questions
Can I replace an 11-inch support with a 14-inch one?
Not as an assumed direct fit. The original mounting locations and windshield angle determine the required length. Match the original bar size unless the manufacturer confirms another configuration.
Are these fixed-length bars or telescoping supports?
The listed part numbers refer to different fixed sizes with pivoting end fittings, not a single telescoping bar with all three lengths.
Does one product include a pair?
No. Taylor Made describes these support bars as sold individually. If two are needed, check the order quantity.
Can I view a listed replacement in Kelowna?
Viewing and local pickup through UsedRVParts are available by appointment. Confirm the item and arrange a visit before travelling.
Récemment consulté
Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement
Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.
Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.
Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.
Nos produits