Taylor Made Boat Fender Covers: Diameter & Length Chart

Boat fender covers help reduce rubbing and surface marks when a fender contacts the hull. The Taylor Made covers here are sized by the diameter and length of the existing fender, not just by boat length. This guide compares navy and black polyester covers in three size groups so you can identify the right product without mistaking the cover for a complete inflated fender.

Measure your existing cylindrical fender

1. Measure the inflated fender's main-body diameter across its widest cylindrical section, excluding rope eyes or end fittings.
2. Measure the cylindrical fender's overall intended covered length, including its curved shoulders as described by its manufacturer.
3. Check the exact fender make and model if available; a similar nominal size may have a different shape or shoulder profile.
4. Choose a cover range that includes both the measured diameter and length. Do not use an oversized cover solely because the colour matches.

Taylor Made fender cover size and colour chart

Each numbered product is a single polyester fender cover. Taylor Made specifies washable construction and protection against abrasion, UV and mildew. The cover does not provide buoyancy or replace an inflated fender.

Choose the right size without buying the wrong product

Colour selection: N and R identify the navy and black versions of the matching size group in this guide. If the dimensions are identical, colour is the main visible difference between those paired products.

Fender condition: A cover should go over a sound, correctly inflated fender. Inspect for leaking valves, cuts or flattened sections rather than relying on fabric to correct a damaged fender.

Cleaning: The manufacturer describes cold-water cleaning with mild detergent. Dry and maintain the cover appropriately; do not use aggressive cleaners that could damage the fabric or hull finish.

Frequently asked questions

Is 9205N the same size as 9205R? Yes. Both are the medium size group; 9205N is navy and 9205R is black.

Can the medium cover fit a 10-inch fender? The published medium diameter range is 8–8½ inches. The large cover group is specified for 10–10½-inch fenders.

Do I receive the inflated boat fender? No. These six SKUs are covers only. Check the individual listing for package contents and actual item condition.

Shop exact Taylor Made fender covers

Each card opens the matching UsedRVParts product listing. Availability and condition may vary by MPN; catalog images identify the cover style rather than proving the condition of the specific item offered.

Taylor Made 9205N — Medium, Navy

For a suitable cylindrical fender measuring 8–8½ in in diameter and 20–27 in long. Cover only, polyester.

Check product and condition

Taylor Made 9205R — Medium, Black

For a suitable cylindrical fender measuring 8–8½ in in diameter and 20–27 in long. Cover only, polyester.

Check product and condition

Taylor Made 9206N — Large, Navy

For a suitable cylindrical fender measuring 10–10½ in in diameter and 26–30 in long. Cover only, polyester.

Check product and condition

Taylor Made 9206R — Large, Black

For a suitable cylindrical fender measuring 10–10½ in in diameter and 26–30 in long. Cover only, polyester.

Check product and condition

Taylor Made 9207N — Extra-large, Navy

For a suitable cylindrical fender measuring 12 in in diameter and 34 in long. Cover only, polyester.

Check product and condition

Taylor Made 9207R — Extra-large, Black

For a suitable cylindrical fender measuring 12 in in diameter and 34 in long. Cover only, polyester.

Check product and condition

Related boat fender and dock-protection references

To choose an inflated fender instead of just its cover, see our Taylor Made Big B fender diameter and colour guide. For permanent protection attached to a dock, use the dock edge-guard and profile guide. These product types serve different purposes.