A furnace sail switch confirms that the blower is moving enough air for the ignition sequence to proceed. Suburban uses several different low-airflow switches across its NT, SF, SFV and SH furnace families. Similar paddles or mounting tabs do not establish interchangeability. Find the complete furnace model, serial number and original switch number before selecting a replacement.

Match the full furnace family

Older NT and selected SF models

525024 is listed for particular NT-30/34, P-30S and older SF models. For SF-42 and SF-42F, the factory parts list specifies a serial-number boundary; do not choose solely by the SF-42 name.

Later SF, SFV and SH models

525003 appears in later SF/SFV/SH service references. Check the original switch, full model and production serial before assuming it replaces an earlier unit.

Other NT and SH switches

525028 is associated with specified NT-12/16/20 models, 233355 with NT-40, and 233383 with SH-35/SH-35F/P-40S. These represent different OEM assignments, not universal alternatives.

Where the sail switch fits in furnace operation

Typical airflow-safety sequence
Thermostat calls for heat12V blower motor startsCorrect airflow operates sail switchOther safety controls permit ignition

Functional explanation only; not a wiring or service bypass diagram. An obstruction, weak motor, low supply voltage or damaged paddle can prevent the switch from operating correctly.

Suburban sail switch part-number reference

MPN Component Furnace family Important selection detail
525024 Airflow sail switch NT-30/34, selected older SF and P-30S Factory schedule includes SF-42 / SF-42F units below serial 924201894. Other applications depend on complete model and production number.
525003 Airflow sail switch Selected later SF/SFV/SH models Listed for a range of newer SF, SFV and SH furnaces. For SF-42 / SF-42F, compare the factory serial boundary and existing switch.
525028 Airflow sail switch NT-12/16/20 S and SE; NT-16/20 SQ and SEQ Factory references assign this number to selected NT small-furnace variants; the full S/SE/SQ/SEQ suffix matters.
233355 Airflow sail switch NT-40 Identified for the NT-40 furnace; do not substitute by the appearance of a nearby NT-series switch.
233383 Airflow sail switch SH-35, SH-35F and P-40S Factory references identify these particular models. Broader P-40 variants in catalog text have not been established as equivalent.
062476 Mounting bracket only NT-16SE and NT-20SE A bracket for positioning the matching airflow switch. The switch is not included.
SF-42/SF-42F serial check: The manufacturer schedule lists 525024 for certain furnaces below serial 924201894; a different switch assignment is made in later production. Check the data plate and the original switch before applying this cutoff to your specific heater. Do not assume every SF-Q or SF-FQ furnace shares the same switch.

Switch versus mounting bracket

062476 is a mounting bracket for specified NT-16SE and NT-20SE furnaces. It provides the correct position for the separate low-airflow switch and does not include the switch. A bent or missing bracket can interfere with proper paddle position even when the switch itself works.

What to check when a furnace won't ignite

A furnace that blows air but fails to ignite does not automatically need a sail switch. Confirm adequate supply voltage, unobstructed ducts and return air, correct blower operation and the manufacturer-specified safety-control sequence. The sail switch, high-temperature limit, ignition board and gas supply all serve different functions.

Never bypass or permanently bridge an airflow or temperature safety device. Turn off propane and electrical power before service and follow the exact Suburban service instructions. A qualified RV technician should perform gas and ignition-system repairs.

Shop exact Suburban switches and bracket

Each card links to the matching UsedRVParts catalog listing and uses its existing product image. Match the factory part number, paddle arrangement, bracket and complete furnace data before ordering.

Low-airflow / sail switches

Switch mounting bracket

Common sail-switch questions

Can 525003 replace 525024 in any SF furnace?

Not universally. Production, model suffix and serial-number differences matter. Use the original factory parts schedule and switch assignment for the exact furnace.

Does NT-40 use the same sail switch as NT-20?

Not according to these manufacturer assignments. NT-40 is listed with 233355, while certain NT-12/16/20 models use 525028.

Is 062476 an electrical switch?

No. It is a switch mounting bracket for the listed NT-16SE and NT-20SE applications.

Does a working blower guarantee that the sail switch closes?

No. Restricted airflow, inadequate blower speed or an obstructed or improperly mounted paddle can prevent correct operation.

Can I bridge the sail switch to get the furnace running?

No. This is part of the furnace safety system and must not be bypassed. Use the model-specific diagnostic procedure.

Related Suburban furnace diagrams

Final part selection and any gas-system repairs should follow the original manufacturer documentation for the exact furnace. Eligible UsedRVParts products can be viewed or picked up by appointment in Kelowna.

Quick MPN links: 525024 · 525003 · 525028 · 233355 · 233383 · 062476

Récemment consulté

Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement

Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.

Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.

Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.

Nos produits

Bulletin d'information sur les pièces de camping-car

Inscrivez-vous pour les promotions à venir !