LA-2021460 — 60-inch silver domestic bunk ladder
Made-in-USA kit with four injection-molded treads, large hanging hooks and optional secured brackets. Match the 60-inch rail length.
View LA-2021460 productStromberg Carlson Interior Bunk Ladder Parts & Mounting Guide
Stromberg Carlson makes 60-inch and 66-inch interior RV bunk ladders in silver and black. There are two different hardware families: domestic LA-2021460/LA-2021466 ladders and imported LA-460/LA-466 ladders. Identify the label on your ladder before replacing hooks, treads, end caps or feet.
Factory assembly and mounting diagrams
The LA-2021460/66 domestic bunk-ladder instructions (PDF) illustrate the loose treads, two top hooks, bracket positions and fastening sequence. The older LA-460/466 imported bunk-ladder instructions (PDF) show the large hooks, smaller mounting hooks and separate bracket hardware. Use the manual for the exact ladder family.
Choose the correct ladder series
| Model family | Lengths | Factory replacement parts |
|---|---|---|
|
LA-2021460 / LA-2021466 Domestic; B suffix is black |
60 or 66 inches | 2150 hardware kit, 8532-RB feet, 6538-MT treads, 6560/6566-VT tubes |
|
LA-460 / LA-466 Imported; B suffix is black |
60 or 66 inches | 2460-A hardware, 8532-CP feet, 8538-T tread, 8539-CP end caps, FST-9975 connector nuts |
Matching bunk ladders and replacement hardware
LA-2021466 — 66-inch silver domestic bunk ladder
Longer made-in-USA kit in silver. Check the bunk height and allow for the required lean angle.
View LA-2021466 productLA-2021460B — 60-inch black domestic bunk ladder
Black-finish 60-inch kit with the same domestic hook and tread family as LA-2021460.
View LA-2021460B productLA-2021466B — 66-inch black domestic bunk ladder
Black 66-inch made-in-USA ladder. Use domestic model-specific replacement hardware.
View LA-2021466B productLA-460B — 60-inch black imported bunk ladder
Older imported four-tread ladder with a different mounting-hook and rung-accessory family from the domestic LA-2021460B.
View LA-460B product2460A — Imported-ladder mounting kit
Stromberg lists factory 2460-A for imported LA-460/466 mounting hardware. Check the existing small hooks and bracket style.
View 2460A product8532CP — Imported-ladder rubber feet
Rubber foot caps for 1-inch-diameter imported bunk-ladder tubing. The domestic series uses separately numbered 8532-RB feet.
View 8532CP product8539CP — Imported replacement tread end cap
Black snap-in end cap specified for imported replacement tread 8538-T. Match the tread profile before ordering.
View 8539CP productUpper hooks, brackets and replacement feet
Both ladder families offer a large top hook that fits over a suitable bunk fascia or a smaller hook used with mounted brackets. The domestic 2150 hardware kit and imported 2460-A kit are separately numbered. The domestic ladder also uses 8532-RB rubber feet; the imported ladder uses 8532-CP. Do not choose feet solely by the nominal one-inch rail diameter if the original cap shape differs.
Treads and end caps
The domestic 2021-series kit has four injection-molded treads, roughly 10 inches long by 2¾ inches wide. The matching replacement tread is 6538-MT. Imported LA-460/466 tread parts use 8538-T and a separate 8539-CP end cap. The imported 8510-CP is a tread cover, not a complete tread. Compare the profile and fastener openings before ordering individual rung parts.
Safe fit and installation
Stromberg specifies a 250 lb maximum load at an 11-degree mounting angle for the domestic bunk ladders. Measure the floor-to-bunk height and verify that the ladder hooks or mounting brackets engage a structurally supported bunk frame. The ladder tubes may be shortened following the correct manufacturer instructions. Before use, confirm the hardware is tight, the ladder feet rest firmly on the floor and the hooks cannot slip free.
For a ladder mounted outside the RV, use the separate LA-401/LA-401BA exterior ladder parts guide. Those rear-wall hinges and stand-offs are not substitutes for bunk-ladder hooks. Browse RV and camper ladders for complete ladder options.
Récemment consulté
Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement
Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.
Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.
Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.
Nos produits