JBP-69.625 — 6 × 9 × ⅝-inch EPDM base pad
View JBP-69.625 productStromberg RV Jack Base Pads: JBP-69.625, 1011.1 & 1214 Sizes
A portable jack pad gives a trailer tongue jack, scissor stabilizer or landing-gear foot a larger rubber contact surface on the ground. Stromberg Carlson's loose Base Pads come in four physical sizes. They are made from molded EPDM rubber and sit beneath the jack; unlike the company's Base Pad Shoes, they do not remain attached to the leveling foot.
Find the Base Pad size and package
| Part number | Pad dimensions (L × W × H) | Manufacturer package |
|---|---|---|
| JBP-69.625 | 9 × 6 × ⅝ in | 4 pads |
| JBP-1011.1 | 11 × 10 × 1 in | 2 pads |
| JBP-1214.1 | 14 × 12 × 1 in | 2 pads |
| JBP-1214.2 | 14 × 12 × 2 in | 1 pad |
The manufacturer specifies up to 30,000 lb under even loading for its EPDM Base Pad family. That is a pad rating under stated conditions, not an increase in the RV's jack capacity, axle rating or permissible supported load. Confirm the jack foot fits fully on the pad and the supporting ground is suitable.
What to measure
Foot-contact area
Measure the length and width of the jack's existing metal foot. It should rest securely inside the pad's usable area.
Pad thickness
The four versions are ⅝, 1 or 2 inches thick; do not confuse the thickness with the pad's footprint.
Ground surface
Choose a stable, level support area without voids or sharp features that would create uneven loading.
Sizes are manufacturer dimensions; this is an original comparison, not a scaled installation diagram.
Compare the four exact products
View JBP-69.625 productJBP-1011.1 — 10 × 11 × 1-inch EPDM base pad
View JBP-1011.1 productJBP-1214.1 — 12 × 14 × 1-inch EPDM base pad
View JBP-1214.1 productJBP-1214.2 — 12 × 14 × 2-inch EPDM base pad
View JBP-1214.2 productLoose pads versus stay-attached shoes
These loose rubber pads can be positioned at a campsite as needed and removed afterward. The separate Base Pad Shoe reference covers models that fit around a leveling foot and remain attached. Do not select a shoe by these loose-pad dimensions.
Using a pad beneath a jack
- Park on suitable ground and follow the RV maker's leveling or stabilizing instructions.
- Centre the metal jack foot on the chosen pad and keep the supporting surface as flat as possible.
- Check that the pad does not rock, slide or bend against an uneven obstruction.
- When breaking camp, raise the jack according to its instructions and collect any loose pads.
Manufacturer reference: Stromberg Carlson Base Pads specifications, size chart and jack-foot comparison.
Récemment consulté
Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement
Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.
Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.
Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.
Nos produits