M1-61 — Black plastic, thin panel
2–7 mm (.075–.275 in) panel; 25.5 mm grip; medium non-locking flush pull.
View matching partSouthco M1 RV Access Door Flush-Pull Latch Parts & Fitment Guide
Select Southco M1 flush-pull, push-to-close RV access-door latches by the manufacturer's actual panel-thickness ranges, latch size, locking function and material. The nearly identical M1-61, M1-62 and M1-63 faces do not mean the mounting brackets fit the same door panel.
Official manufacturer drawings and specifications
Southco publishes an individual technical drawing, catalog page, performance data and downloadable CAD for its M1 flush-pull latches. Use the manufacturer's actual drawings for screw spacing, keeper engagement and panel thickness; compare the installed latch with the manufacturer's technical drawing.
Browse original Southco M1 drawings and latch variants. Example: Southco M1-61 technical specification.
Choose by panel thickness, then finish
M1-61 black plastic or M1-61-8 stainless; 25.5 mm (1.00 in) nominal grip.
M1-62 plastic or M1-62-8 stainless. Keeper and mounting dimensions must be checked.
M1-63 plastic or M1-63-8 stainless. Verify measured door skin plus mounting support.
M1-64-8 stainless; not the same bracket configuration as thin-panel M1-61.
Small-size exception: M1-15-61-8 is a small stainless latch for 1–21 mm panel thickness and a 23 mm nominal grip; this is a different physical size series and should not be treated as a standard medium M1 replacement.
Compare Southco M1 latch sizes and finishes
M1-61-8 — 316 stainless steel, thin panel
2–7 mm panel; non-locking medium flush-pull, stainless version.
View matching partM1-62 — Black plastic, medium panel
7–12 mm (.275–.475 in) panel; 25.5 mm grip. Do not substitute for 2–7 mm without checking mounting.
View matching partM1-62-8 — 316 stainless steel, medium panel
7–12 mm panel; medium-size non-locking latch with a stainless finish.
View matching partM1-63 — Black plastic, thicker panel
12–17 mm (.475–.675 in) panel; non-locking M1 medium flush-pull.
View matching partM1-63-8 — 316 stainless steel, thicker panel
12–17 mm panel; verify panel thickness and keeper offset, not just visible finish.
View matching partM1-64-8 — 316 stainless steel, thickest standard panel
17–22 mm (.675–.875 in) panel. The thicker-panel version has its own part number.
View matching partM1-15-61-8 — Small stainless flush pull
Small-size latch, for 1–21 mm panel; different geometry from the medium M1-61-8.
View matching partCommon fitment mistakes
Panel thickness controls which mounting arrangement can clamp the door. Grip is a separate latch/keeper engagement dimension and is approximately 25.5 mm for these medium variants.
M1-41, M1-42 and M1-43 are related key-locking families; they require their own factory mechanical dimensions and keying checks. They are not direct replacements for the non-locking part numbers above.
The smaller M1-15-61-8 has different proportions from M1-61-8. Use the manufacturer's drawing to measure the outer bezel, cutout, fasteners and depth.
Before ordering or installing
Measure the door panel thickness, latch cutout, keeper setback and clearance behind the inner skin. Identify whether the original mechanism uses a mounting bracket, screws and an additional keeper. Confirm material and finish, particularly if an exterior compartment is exposed to water or corrosion.
For conventional baggage-door cam locks and slam latches, use the separate baggage-door latch and cam-lock reference; those are different mechanisms.
Safety: Test the complete latch and keeper with the door open. Do not use a non-locking access latch in place of a required secure lock or emergency-release mechanism.
Récemment consulté
Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement
Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.
Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.
Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.
Nos produits