The right Solera slide topper starts with one measurement: the distance between the outside edges of the slide-out room flanges. That is not the same as the complete awning's width. Use the chart below to match the room measurement to a listed fabric size and exact Solera manufacturer part number before ordering.

Three measurements to check

1. Measure the room flanges

Measure horizontally from the outer edge of the left slide-out flange to the outer edge of the right flange. Do not use just the slide box wall, old fabric or roller hardware measurement.

2. Pick the fabric-width range

Find your flange-to-flange measurement in the chart. For the Solera 5000 series, the listed complete awning width is always 5 inches longer than the corresponding fabric width.

3. Check projection and space

Confirm the room extends no more than the listed 48-inch roller projection, and check wall clearance, upper-flange clearance and mounting location before purchase.

Example: A slide room measures 100 inches between outer flange edges
Room flange measurement100"Selected fabric width103"Complete awning width108"

The corresponding black Solera 5000 model is V000168108, which covers the manufacturer's 98–103" flange range. The widths above illustrate the three different numbers: measured flange, fabric and complete assembly. This is a sizing example, not confirmation of installation fit in every RV.

Fabric width vs assembly width: Lippert describes a 5-inch difference between fabric and overall awning width. For instance, the 67" fabric option is sold as a 72" complete awning, suitable for the manufacturer's listed 62–67" flange range. Don't select using the complete awning width as though it were the room flange measurement.

Solera slide topper fabric-width selection chart

These size ranges and part numbers follow Lippert's 5000 Series reference chart. Each linked black part number leads to a matching UsedRVParts product. The separate white V000163274 is listed for the 67" fabric option. Not every manufacturer size currently has a matched product on this store.

Slide flange to flange Fabric width Complete awning width Shop matching part
57–61" 61" 66" Black — V000168104
62–67" 67" 72" Black — V000231482
White — V000163274
68–73" 73" 78" No matching listed item
74–79" 79" 84" Black — V000168105
80–85" 85" 90" Black — V000165062
86–91" 91" 96" Black — V000168106
92–97" 97" 102" Black — V000168107
98–103" 103" 108" Black — V000168108
104–109" 109" 114" Black — V000168325
110–115" 115" 120" Black — V000251461
116–121" 121" 126" No matching listed item
122–127" 127" 132" Black — V000168326
128–133" 133" 138" Black — V000184673
134–139" 139" 144" No matching listed item
140–145" 145" 150" Black — V000177334
146–151" 151" 156" Black — V000165061
152–157" 157" 162" Black — V000168109
158–163" 163" 168" Black — V000168110
164–169" 169" 174" Black — V000168112
170–175" 175" 180" Black — V000251477
176–181" 181" 186" Black — V000251478
182–187" 187" 192" Black — V000194925

Size ranges are the manufacturer's listed flange-width groupings. If your measurement sits on a size boundary, follow the exact manufacturer sizing guidance and check mounting clearances and the installation manual. Manufacturer sizes without a store product are shown for reference, not as active store listings.

Before choosing or replacing your slide topper

Measure with the slide-out room closed or positioned as the manufacturer directs, and verify the true extension distance once open. Lippert specifies up to 48" roller projection for the listed Solera 5000 units. Also check that there is space above the upper flange for the awning rail, brackets and cover; the manufacturer permits mounting up to 5" above the upper flange in the applicable configuration.

A full Solera slide topper awning kit is different from buying replacement fabric only or an individual bracket or idler. Match the existing awning series, roller assembly and part number when buying parts to repair an installed unit. The product listings below are complete-model catalog entries, not universal replacement-fabric-only options.

Shop listed Solera topper sizes

Choose by exact MPN and measurement. Catalog product images help identify each listing; confirm the manufacturer number and the individual product's condition and contents before ordering.

Jump to a fabric width: 61" · 67" · 79" · 85" · 91" · 97" · 103" · 109" · 115" · 127" · 133" · 145" · 151" · 157" · 163" · 169" · 175" · 181" · 187" · 67" white

Frequently asked sizing questions

Do I measure the old awning or the slide-out room?

Start with the distance between the outside edges of the slide-out's side flanges. The complete assembly, fabric and room flange widths are different measurements.

Why are complete awning width and fabric width different?

The Solera 5000 size designation includes roller and end hardware. Lippert's published dimensions place the complete assembly 5 inches wider than the fabric measurement.

Will a 103-inch fabric topper work on a 100-inch flange width?

That is within Lippert's 98–103" range for the black V000168108 model. Also verify projection and the room's mounting clearance before deciding it is suitable.

Are all Solera toppers shown here the same as replacement fabric rolls?

No. The linked items are slide-topper awning listings. Fabric-only products and awning repair components have different part numbers and fitment requirements.

What if I need a size without a shop link in the chart?

The chart includes some manufacturer sizes for which no corresponding UsedRVParts listing was matched. Use the exact size and part number for your inquiry rather than assuming the next listed length will fit.

Related guides and manufacturer measuring instructions

UsedRVParts offers viewing and pickup of eligible parts in Kelowna by appointment. Product condition and availability depend on the individual listing.

Quick size links: 61" · 67" · 79" · 85" · 91" · 97" · 103" · 109" · 115" · 127" · 133" · 145" · 151" · 157" · 163" · 169" · 175" · 181" · 187" · White 67"

Récemment consulté

Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement

Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.

Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.

Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.

Nos produits

Bulletin d'information sur les pièces de camping-car

Inscrivez-vous pour les promotions à venir !