MORryde Quick Connect RV Steps: STP-221, 222 & 223 Fit Guide
When an RV's existing entry steps need replacement, a familiar-looking assembly may still be the wrong size or mounting style. MORryde Quick Connect steps use detachable mounting brackets and adjustable ground-contact feet rather than folding into the doorway like a standard StepAbove system. This guide helps identify which of the three Quick Connect models fits the measured entry height—and which mounting checks matter just as much as the step count.
MORryde Quick Connect size and height chart
| Part number | Number of steps | Threshold-to-ground height | Step rise |
|---|---|---|---|
| STP-221 | 2 | 21½–27½ in | 9 in |
| STP-222 | 3 | 27½–36 in | 8 in |
| STP-223 | 4 | 35½–44 in | 8 in |
Height is measured vertically from the top of the RV's doorway threshold to the ground, not from the bottom of the chassis or the top of an existing step. The overlap between adjacent height ranges does not make the products interchangeable; check every mounting requirement.
Three checks before buying the step system
Shop the matching Quick Connect step models
STP-221 — 2-Step Quick Connect
Step height: 21½–27½ in • Rise: 9 in
Two-step Quick Connect version. Best considered when the measured threshold height falls in its published range.
View product details and availability
STP-222 — 3-Step Quick Connect
Step height: 27½–36 in • Rise: 8 in
Three-step system with adjustable ground-contact legs. Verify that mounting hardware can attach to reinforced framing.
View product details and availability
STP-223 — 4-Step Quick Connect
Step height: 35½–44 in • Rise: 8 in
Four-step design for a taller measured threshold height. Check mounting reinforcement and step clearance before ordering.
View product details and availabilityHow the mounting system attaches
- Verify that the mounting surface has adequate structural reinforcement and satisfies the threshold clearance requirement.
- Align the first mounting bracket with the door's outside edge; check step position and door swing clearance before drilling.
- Use the supplied mounting hardware and MORryde's installation sequence for fitting the first bracket.
- Adjust the step legs, attach the step to the first bracket and use the assembly to locate the second bracket.
- Once both brackets are correctly secured, check that each latch fully engages and the feet contact the ground properly.
For the mounting drawings, required hole placement and complete warnings, see MORryde's Quick Connect pre-installation and installation instructions (PDF).
More RV entry-step reference pages
If your RV uses a step system that folds up into the doorway rather than a removable external assembly, review the StepAbove Gen 2 three-step doorway fit guide. Those model numbers follow different fitment rules and should not be selected using the Quick Connect chart.
Récemment consulté
Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement
Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.
Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.
Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.
Nos produits