Identify T-H Marine Outboard Jack Plates

If the original outboard bracket is missing its label, identify whether it has a hydraulic actuator or a fixed offset. Full-size ATLAS black plates, compact Micro-Jacker units and clamp-style Mini-Jacker brackets have different load ratings and transom mounting. A jack-plate position gauge or trim switch is an accessory, not the motor bracket itself.

Recognize the original jack plate style

ATLAS standard hydraulic Full-size powered adjustment. The black 10- and 12-inch setback examples shown here are rated by T-H Marine up to 300 hp and 625 lb.

ATLAS Micro-Jacker Smaller hydraulic assembly with four-inch setback, rated up to 115 hp and 425 lb. Check the specific motor's actual weight.

Mini-Jacker bracket Non-hydraulic cast-aluminum offset bracket for compatible clamp-on motors up to 35 hp and 150 lb.

Simplified design silhouettes, not scaled drawings or drilling templates. Use the manufacturer's installation layout for mount points.

Match both engine horsepower and weight. Motor weight, transom strength, installation hardware and boat design must all suit the exact plate. T-H Marine lists ATLAS standard and Micro-Jacker as different families, and the small Mini-Jacker has no hydraulic actuator.

Five checks for a safe replacement match

Photograph the existing bracket and actuator, if present, and record the outboard's rating plate and measured weight information.
Determine whether the original has an integrated hydraulic motor or is a static clamp-on bracket.
Check the setback from the transom to the motor mounting face: models shown include 4, 10 and 12 inches.
If identifying a failed readout, the FAGK-2-DP gauge only fits specified 6-/10-/12-/14-inch ATLAS designs; it is not for the Micro-Jacker.
Check transom integrity, fastener requirements and electrical controls with a qualified marine installer before replacing the assembly.

Controls are separate from the structure. The TTC-1-DP push-button switch can control compatible trim or hydraulic jack plates; the FAGK-2-DP is an ATLAS position readout with specific model compatibility. Neither is a hydraulic jack plate or an installation hardware kit.

Compare exact model markings and dimensions

MPN	Series or part	Setback	Published motor limit / role	Operation
AHJ-10V-B-DP	ATLAS Black	10 in	300 hp / 625 lb	Hydraulic adjustment
AHJ-12V-B-DP	ATLAS Black	12 in	300 hp / 625 lb	Hydraulic adjustment
AHJM-4-DP	ATLAS Micro-Jacker	4 in	115 hp / 425 lb	Hydraulic adjustment
MJ-1-DP	Mini-Jacker	4 in	35 hp / 150 lb	Fixed bracket; 3-in vertical offset
FAGK-2-DP	ATLAS position gauge	Not applicable	Not an engine mount	In-dash gauge; model-specific
TTC-1-DP	Trim / jack-plate switch	Not applicable	Switch only	Flat-surface remote control

Motor limits are manufacturer ratings for the identified product family; they do not establish suitability for a specific boat or transom. Accessory rows are not outboard mounting plates.

Compare matching jack plate products

Review the listed product photo and exact MPN, then check condition and availability before ordering.

Full-size hydraulic ATLAS models

These standard black ATLAS versions have 10- and 12-inch setbacks and internally mounted hydraulics. Their mounting location must be verified.

T-H Marine AHJ-10V-B-DP ATLAS Black 10-inch hydraulic setback catalog product image

T-H Marine AHJ-10V-B-DP — 10-inch hydraulic setbackLook for the black ATLAS structure, internal hydraulic actuator and 10-inch setback. Verify the model plate and mounting faces before assuming another ATLAS unit is a direct substitute.Check item and availability

T-H Marine AHJ-12V-B-DP ATLAS Black 12-inch hydraulic setback catalog product image

T-H Marine AHJ-12V-B-DP — 12-inch hydraulic setbackThe 12-inch black ATLAS version may resemble the 10-inch plate from a photograph, but it positions the motor farther aft. Measure and read the MPN.Check item and availability

The smaller Micro-Jacker

The four-inch-setback powered Micro-Jacker is intended for much smaller outboards than a standard ATLAS plate.

T-H Marine AHJM-4-DP ATLAS Micro-Jacker compact hydraulic jack plate catalog product image

T-H Marine AHJM-4-DP — Compact hydraulic jack plateThe Micro-Jacker is the small powered model. Compare its compact 14⅝-inch wide by 11½-inch high body and four-inch setback rather than assuming it uses the large ATLAS footprint.Check item and availability

Fixed Mini-Jacker offset

The MJ-1-DP is a small cast-aluminum offset bracket with no hydraulic motor.

T-H Marine MJ-1-DP Mini-Jacker small clamp-on outboard bracket catalog product image

T-H Marine MJ-1-DP — Small clamp-on outboard bracketThe Mini-Jacker is a non-hydraulic, clamp-style offset bracket. The original installation needs to match its 35 hp / 150 lb limitations and transom attachment.Check item and availability

Associated controls and instruments

FAGK-2-DP and TTC-1-DP are separate components; verify the supported jack plate and original wiring.

T-H Marine FAGK-2-DP ATLAS position gauge digital jack-plate height display catalog product image

T-H Marine FAGK-2-DP — Digital jack-plate height displayIf the missing part is a black in-dash LED position display, compare FAGK-2-DP. Manufacturer fit lists 6/10/12/14-inch ATLAS plates only; it is not universal.Check item and availability

T-H Marine TTC-1-DP Trim / jack-plate switch remote push-button control catalog product image

T-H Marine TTC-1-DP — Remote push-button controlThis small black push-button switch is a control part, not the jack-plate actuator. Check the original wiring and control system before replacing it.Check item and availability

UsedRVParts product viewing and pickup are by appointment in Kelowna. Check each listing for condition and availability.

Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement

Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.

Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.

Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.

Nos produits

Identify T-H Marine ATLAS, Micro-Jacker & Mini Outboard Plates