Taylor Made 30100 · 5 lb
Legacy fluke-pattern anchor · galvanized steel
Compare the individual listing's photos and included parts.
Identify Taylor Made Legacy Anchors by Part Number & Weight
When comparing a loose or previously installed fluke anchor, begin with its original manufacturer number and nominal weight, not just the overall shape. Taylor Made's Legacy range includes five catalogued weights from 5 to 26 pounds, with a galvanized steel body and T-section flukes.
Durable galvanized construction
Legacy anchors are manufactured from S355 structural steel with a hot-dipped galvanized finish for corrosion resistance.
T-section fluke profile
The Legacy design uses broad flukes with T-section geometry. Match the application and complete anchoring arrangement before relying on the system.
Identify the anchor by model and nominal weight
| Taylor Made MPN | Nominal weight | Anchor form | Construction |
|---|---|---|---|
| 30100 | 5 lb | Legacy T-section fluke | S355 structural steel, hot-dip galvanized |
| 30101 | 8 lb | Legacy T-section fluke | S355 structural steel, hot-dip galvanized |
| 30102 | 12 lb | Legacy T-section fluke | S355 structural steel, hot-dip galvanized |
| 30103 | 18 lb | Legacy T-section fluke | S355 structural steel, hot-dip galvanized |
| 30104 | 26 lb | Legacy T-section fluke | S355 structural steel, hot-dip galvanized |
What to inspect before identifying a replacement
- Look for a manufacturer part number on the packaging, paperwork or any remaining label. Record the anchor's actual weight if the original part number cannot be located.
- Compare the fluke profile, shank and overall anchor construction with the exact item photos. A similar anchor style does not establish the same manufacturer number.
- Inspect the shank, fluke edges and welds for bends, cracks, deep corrosion or previous repairs. Verify that the chain attachment point is intact.
- Check whether any shackle, chain, rope or connecting hardware is actually included with the listed item; do not assume that a complete anchoring system is supplied.
- Before use, confirm a suitable anchor, rode, chain and attachment method for the boat and local bottom, depth and weather conditions.
Each listing needs its own condition and completeness check. UsedRVParts offers viewing and pickup by appointment in Kelowna.
Find an exact matching Legacy anchor
Open the matching store listing to review its photos, parts and condition.
Taylor Made 30101 · 8 lb
Legacy fluke-pattern anchor · galvanized steel
Compare the individual listing's photos and included parts.
Taylor Made 30102 · 12 lb
Legacy fluke-pattern anchor · galvanized steel
Compare the individual listing's photos and included parts.
Taylor Made 30103 · 18 lb
Legacy fluke-pattern anchor · galvanized steel
Compare the individual listing's photos and included parts.
Taylor Made 30104 · 26 lb
Legacy fluke-pattern anchor · galvanized steel
Compare the individual listing's photos and included parts.
More marine part references
For alongside-the-dock protection, compare our Taylor Made Big B fender identification guide and dock side-guard profiles.
Récemment consulté
Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement
Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.
Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.
Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.
Nos produits