Have a broken fender skirt or only one side remaining? Start by identifying the old part's mounting-hole spacing, wheel opening, leg shape and overall size. Compare these measurements with the ICON examples below before choosing a replacement. The listed FS number identifies the skirt design; colour has its own ordering part number.
How to identify an unknown skirt
Simplified illustration for orientation; not a scaled profile or hole-location drawing.
- Photograph the damaged skirt and, if possible, its back side and original fastener locations.
- Measure the total span (F) and height (C) on the actual skirt, not just the RV's fender opening.
- Note the distance between the top mounting holes (A) and the heights/widths of the wheel openings and legs (B, D, E).
- Check for a molded identifier or FS number before comparing each product photograph with the old part.
For the full set of measurement positions, refer to ICON's fender skirt measurement sheet (PDF).
Multiple skirt styles may appear under the same RV manufacturer or model family. A model name is only a starting clue; verify the old panel's complete shape and fastening locations.
Find the closest ICON skirt by part number and size
Use this table to compare exact manufacturer part numbers and shapes before checking individual listing photos. Sizes alone do not guarantee a replacement will fit.
| ICON part / design | Axles | Length (F) | Height (C) | Colour |
|---|---|---|---|---|
| 01738FS1738 | Single | 42-1/4 in | 18-3/4 in | Polar White |
| 12558FS2558 | Single | 33-1/2 in | 18 in | Polar White |
| 14519FS4405 | Single | 36-1/4 in | 17-3/8 in | Polar White |
| 01424FS700 | Tandem | 65-5/8 in | 10-1/4 in | Polar White |
| 01770FS1770 | Tandem | 69-3/8 in | 9-1/2 in | Polar White |
| 12322FS2322 | Tandem | 72-5/8 in | 10-1/4 in | Black |
| 14895FS4527 | Tandem | 71-5/8 in | 10-1/2 in | Black |
| 14955FS4733 | Tandem | 81-1/4 in | 12-1/2 in | Black |
| 15043FS5012 | Tandem | 77 in | 12-3/4 in | Black |
| 15158FS5158 | Tandem | 68-1/8 in | 12 in | Black |
| 14675FS4675 | Triple | 115-1/4 in | 16-1/4 in | Black |
All dimensions are inches. Compare the original holes, contour and leg design in addition to these overall measurements.
Review the matching part photos
The following catalog listings give a starting point for checking the skirt against your existing piece. Confirm the product's condition before ordering.
Single-axle fender skirts
Use the surviving corners and screw locations to identify the one-wheel profile.
Tandem-axle fender skirts
Compare the middle drop and the two outside legs on the old skirt.
Triple-axle fender skirts
Long multi-wheel skirts require particular attention to joint design and the complete outline.
