If RV curtains stick, drop off the track or no longer close smoothly, the problem may be a missing carrier, incorrect tape or broken end stop—not the entire rail. First identify the track cross-section and attachment style, then compare the actual JR Products hardware. This guide covers the Type B I-beam, Type C internal-slide and Type D slide-tape families available in our catalog.

Three common curtain-rail problems

Carriers fall off the endLook for an absent or loose end stop. Check the track profile before ordering a replacement, especially on Type B rails.
Curtain is difficult to slideCheck for damaged carriers, mismatched rail and tape, bent track sections or debris. Compare an undamaged carrier with the replacement.
Rail comes looseInspect mounting screws, supporting material and the wall or ceiling attachment. Replacing a carrier will not repair a loose mounting surface.

Recognize the original rail family

Type B I-beamWheeled hook carriers travel on an exposed beam profile. The 80241 and 80251 rails use I-beam end retainers.
Type C internal-slideCarrier slides are retained within a plastic rail. Type C hardware uses a different end stop and tape from Type D.
Type D slide tapeThese tracks are designed to take 1/2-inch slide tape. Match whether the original is wall-mounted or ceiling-mounted.

Symbols are simplified identification aids rather than manufacturer-dimensioned cross-sections. Compare an actual piece of your existing track to the product listing.

Track, carrier and end-stop identification chart

Track type Track part numbers Carriers or tape Retaining hardware Check before ordering
Type B I-beam 80241 / 80251 81155 wheeled carriers 81835 I-beam stops 81195 for flat-bottom rail instead
Type C internal-slide 80321 / 80351 81265 sew-in carriers; 81355 tape 81205 end stops Confirm carrier profile and attachment
Type D slide-tape 80371 ceiling / 80401 wall 81365 flexible slide tape 81385 end stops Do not substitute Type C tape
Check Type B end stops carefully: 81835 is listed for the 80241/80251 I-beam design. The 81195 end stop is for a flat-bottom Type B rail and does not fit those I-beam tracks. A shared Type B description does not make their stop hardware interchangeable.

Compare matching products and catalog images

Product images can help identify the track and carrier family. Check the individual item for exact contents, current condition and availability. A catalog photograph does not represent the condition of any particular second-hand unit.

Type B I-beam rails, wheels and end hardware

Type C internal-slide rails, carriers and stops

Type D wall and ceiling slide-tape hardware

Before fitting a curtain rail replacement

Photograph the end profile and the back of one existing carrier. Record the complete rail length, whether it mounts to the wall or ceiling, and how the curtain connects to the moving hardware. Check that suitable end stops are fitted before testing the curtain.

For eligible used items, viewing and pickup in Kelowna are available by appointment. Confirm the listing and arrange your visit before coming in.

For related RV interior repairs, see the drawer slides and rear-socket identification guide and cabinet hinges and lift supports.

Récemment consulté

Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement

Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.

Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.

Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.

Nos produits

Bulletin d'information sur les pièces de camping-car

Inscrivez-vous pour les promotions à venir !