JR Products 10935
Fleetwood-style end-mounted trigger with two-inch mounting-hole spacing.
Identify JR Products Compartment Door Trigger Latches
An RV baggage compartment can use an end-mounted trigger latch, a flush-mounted trigger or an offset-mounted trigger. The outside shapes can look similar, but their mounting holes and overall lengths differ. Comparing these four manufacturer numbers helps identify a removed part before it is reinstalled.
Identify the trigger latch mounting form
These are manufacturer-listed measurements for the specific JR Products part numbers, not a guarantee that similarly mounted RV compartment doors use the same latch.
| JR MPN | Mount style | Mounting-hole spacing | Overall length |
|---|---|---|---|
| 10935 | End mount, Fleetwood-style | 2 in on centre | 4.20 in |
| 10945 | End mount | 3 in on centre | 3.34 in |
| 11705 | Flush mount | 1.343 × 1.87 in pattern | 3.75 in |
| 11715 | Offset mount | 3 in on centre | 3.21 in |
Three-inch mounting holes do not mean interchangeable latches. Parts 10945 and 11715 both use holes 3 inches apart, but 10945 is end-mounted while 11715 is offset-mounted. The flush-mounted 11705 uses a different two-dimensional hole pattern of 1.343 × 1.87 inches.
What to inspect on the original hardware
- Check the trigger's mounting face: end, flush and offset patterns mount differently.
- Measure hole centres: 10935 uses 2 inches; 10945 and 11715 use 3 inches; 11705 has a rectangular 1.343 × 1.87-inch pattern.
- Compare overall length: the four bodies are 4.20, 3.34, 3.75 and 3.21 inches, in that part-number order.
- Check the operating linkage: compare the existing latch's trigger action, attachment, cable or rod connection and latch orientation.
- Confirm the striker: the replacement must engage the original door hardware and release freely without forcing the panel.
Exact catalog part numbers
Each card leads to an exact UsedRVParts product listing. Review the item's stated condition and stock; viewing and pickup in Kelowna are by appointment.
JR Products 10945
End-mounted trigger with three-inch mounting-hole spacing, unlike the two-inch Fleetwood pattern.
JR Products 11705
Flush-mounted trigger with a rectangular mounting pattern. Do not select from overall length alone.
JR Products 11715
Offset-mounted trigger; although it shares three-inch hole spacing with 10945, its mounting form differs.
Related compartment door reference
To match another form of locking handle, compare T/L handles and cam lengths. For components that hold a compartment door open, visit the JR Products door-catch identification guide.
Récemment consulté
Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement
Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.
Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.
Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.
Nos produits