Dutton-Lainson 70323
Standard replacement for DLC1800, with a retaining nut for its drive shaft.
Identify Dutton-Lainson Winch Handles and Replacement Lines
A missing handle or worn winch line needs to be matched to the winch model rather than to appearance alone. These five Dutton-Lainson parts include three different handle fittings, one galvanized cable-and-hook assembly and one heavy-duty polyester strap.
Identify the accessory by part number
Manufacturer part numbers refer to individual accessories; do not assume one handle fits every winch in the same capacity range.
| MPN | Part | Size | Manufacturer-listed application | Included equipment |
|---|---|---|---|---|
| 70323 | Offset winch handle | 9-1/2 in | Current DLC1800; earlier DL1602A and DL1802A | 5/8-in hex lock nut included |
| 70325 | Offset winch handle | 9-1/2 in | Current DLC1600; optional on DLC600, DLC1100, DLC1400 and WG1500/WG2000 standard-shaft models | 1/2-in hex lock nut included |
| 70330 | Quick-attach handle | 9-1/2 in | Current DLC2000, DLC2500, DLC3200, DL3500B and DLB1550A | Spring clip; no nut needed |
| 24043 | Galvanized cable and hook | 3/16 in × 25 ft | D-L hand winches up to 1,800 lb and SA5000/SA7000 electric winches | 7×19 cable with safety-latch hook |
| 24240 | Polyester strap and hook | 2 in × 20 ft | D-L hand winches up to 2,600 lb when installed as specified | Hook, two drum-installation bolt lengths and locknut |
Understand the ratings. Dutton-Lainson lists 840 lb as a recommended safe working load for cable 24043 in applications other than its listed winch uses; that number is not the cable's breaking strength. The 24240 strap has a specified 4,000-lb breaking strength and is listed for hand winches up to 2,600 lb. Breaking strength is not the same as a rated working load.
Confirm the original handle or line
- Check the handle mounting: 70323 and 70325 use lock nuts of different sizes; 70330 uses a spring-loaded quick-attach clip.
- Read the winch model: the three handles are not universal, even though all measure 9-1/2 inches long.
- Inspect line wear: replace cut, frayed or deformed cables or straps rather than relying on an old appearance or capacity label.
- Verify drum attachment: confirm the compatible bolt or cable-clamp arrangement and the winch's rated line capacity.
Browse exact replacement parts
Open each listing to check its stated condition and availability. Viewing or pickup in Kelowna is by appointment.
Dutton-Lainson 70325
Manufacturer-listed option for several smaller pulling winches; compare shaft configuration.
Dutton-Lainson 70330
Quick-attach handle for changing drive shafts on matching two-speed winches.
Dutton-Lainson 24043
Recommended safe working load for other applications: 840 lb; not a breaking-strength value.
Dutton-Lainson 24240
4,000-lb breaking strength; colour may vary by material availability.
Complete winch models and parts guides
Need to identify the complete boat-trailer winch first? See the Dutton-Lainson model identification chart.
Récemment consulté
Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement
Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.
Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.
Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.
Nos produits