Replacing damaged boat-trailer bunk covering? C.E. Smith carpet rolls are available in two widths and two colors in the UsedRVParts catalog. Even when the material appears identical, the part number determines whether the roll is 11 inches by 12 feet or 18 inches by 18 feet.

Identify the correct C.E. Smith bunk carpet

MPN Color Width Length Manufacturer board-size guide
11330 Black 11 in 12 ft Nominal 2×4 or 2×6 bunk boards
11372 Gray 11 in 12 ft Nominal 2×4 or 2×6 bunk boards
11349 Black 18 in 18 ft Nominal 3×8 or 4×8 bunk boards
11373 Gray 18 in 18 ft Nominal 3×8 or 4×8 bunk boards

Parts 11330 and 11372 are the 11-inch-wide rolls in black and gray. Parts 11349 and 11373 are the larger 18-inch-wide rolls, again in black and gray. All four are PET polyester bunk carpet rather than a complete wooden bunk-board assembly.

Measure your actual bunk before ordering: C.E. Smith lists 11-inch carpet for nominal 2×4 or 2×6 bunks and 18-inch carpet for nominal 3×8 or 4×8 bunks. These are board-size guidelines, not a guarantee of coverage for every wrap pattern. Allow for the underside overlap, ends and trimming.

Replacement identification checklist

  1. Read the old packaging or part number: compare the complete five-digit C.E. Smith code, including the color and roll size.
  2. Measure the existing bunk: check board width, thickness and length. Nominal lumber dimensions do not always equal the finished measurements.
  3. Check the wrap: if you can see the old underside overlap, measure how much width was used to cover the top, sides and fastening area.
  4. Work out the total length: count the bunks being recovered, allow for end wraps and trim, and choose enough total roll length before cutting.
  5. Inspect the bunk structure: look for deteriorated boards or loose brackets that need attention before new carpet is installed.
  6. Confirm the listing: check exact MPN, product condition, supplied quantity and current availability before ordering.

Bunk carpet photos and matching part numbers

The four products below are marked Brand New in the UsedRVParts catalog. Product condition and fulfillment details are shown on the individual listings. Eligible viewing or local pickup in Kelowna is by appointment.

Related boat-trailer support guides

If the part you are replacing is a guide-on or roller rather than the bunk covering, use our C.E. Smith carpeted bunk guide-ons and boat trailer roller identification for those different components.

Récemment consulté

Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement

Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.

Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.

Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.

Nos produits

Bulletin d'information sur les pièces de camping-car

Inscrivez-vous pour les promotions à venir !