Attwood 1002
Black E-coated steel, spring-equipped pin
Installed mount height: 2 in
Check exact productIdentify Attwood 1002, 1002-S & 1002-SS Boat Seat Mounts
Replacing a boat-seat mount without the old package? Attwood 1002, 1002-S and 1002-SS are closely related Lock'N-Pin 3/4-inch system fittings, but they have different profiles and materials. Identify the original mounting arrangement first so the replacement matches the seat and pedestal.
Tell the three Attwood mounts apart
| Manufacturer part | Identifying features | Installed height | Construction |
|---|---|---|---|
| 1002 | Black E-coated steel, spring-equipped pin | 2 in | Steel |
| 1002-S | Black E-coated steel, non-spring pin | 1 in | Steel |
| 1002-SS | Stainless steel, non-spring stainless pin | 1 in | Stainless steel |
The spring-equipped 1002 is 2 inches tall when mounted. The 1002-S and 1002-SS are both 1 inch tall, with the latter distinguished by stainless-steel construction. Each has the manufacturer's specified 3° tilt and Type B seating classification.
Measure the mount itself, not just the pedestal. A low-profile mount can affect the seating arrangement even if the post below it is the same nominal height. The shared Lock'N-Pin system designation does not make every seat assembly interchangeable.
Identification steps before replacing the mount
- Read the complete MPN. Look for 1002, 1002-S or 1002-SS. Keep the letters when matching an original part.
- Check the spring. The catalog's spring-equipped 1002 differs from the lower-profile no-spring versions.
- Inspect the material and finish. Black E-coated steel identifies the listed 1002/1002-S construction, whereas 1002-SS has stainless-steel construction.
- Confirm the seat fasteners. Compare the original seat-side hole pattern, hardware condition and mounting clearance with the exact part listing.
- Identify the mating post. These are mounts for the 3/4-inch Lock'N-Pin system, not the larger 2-3/8-inch 238 Series. Check the post and base together.
- Check the installation position. Type B fittings must not be used at the helm or driver position. Attwood does not recommend interchanging Lock'N-Pin components with other manufacturers' seating systems.
Find the matching Attwood part number
Use the product cards below to open the exact UsedRVParts listings. All three items shown are currently catalogued as Brand New; always check the live listing for condition and availability. Viewing and pickup for eligible products in Kelowna are by appointment.
Attwood 1002-SS
Stainless steel, non-spring stainless pin
Installed mount height: 1 in
Check exact productRelated seat-pedestal identification guides
Replacing more than the mount? Identify the matching Lock'N-Pin pedestal post by height and connection and threaded or non-threaded deck base. For a different post system, see Attwood 238 Series seat hardware identification.
Récemment consulté
Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement
Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.
Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.
Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.
Nos produits