Identify Ancor NMEA 2000 Kits and Connector End Types
Use the Ancor manufacturer number to distinguish complete NMEA 2000 starter kits from fittings that finish a cable, pass through a bulkhead or terminate the network. The words “field-serviceable connector” and “terminator” can be confused, but they refer to different electrical jobs.
Separate the single- and dual-device kits
270201 · Single-device starter
A one-metre network power lead with tee, one single tee, one two-metre device drop and a male/female pair of network end terminators.
270202 · Dual-device starter
Includes the one-metre power tee, dual tee, male/female network end terminators and two two-metre drop cables for a two-device arrangement.
Identify each connector by its exact number
| MPN | Type | Function or kit contents |
|---|---|---|
| 270201 | Starter kit · one device | 1 m power cable with tee, single tee, male and female end terminators, one 2 m drop cable |
| 270202 | Starter kit · two devices | 1 m power cable with tee, dual tee, male and female end terminators, two 2 m drop cables |
| 270107 | Bulkhead adapter | Provides a network connection point through a bulkhead or panel |
| 270109 | Female field-serviceable connector | Cable-end connector to terminate bulk cable physically or replace damaged female end; not a network resistor terminator |
| 270110 | Male field-serviceable connector | Cable-end connector to terminate bulk cable physically or replace damaged male end; not a network resistor terminator |
| 270114 | Inline network terminator | Designed to retain proper network-end termination at a drop-cable connection |
Check function, number and condition
- Confirm whether the existing system needs a complete starter kit, a panel-through adapter, a replaceable cable-end connector or an end-of-network terminating component.
- 270201 is a single-device kit; 270202 adds a second device drop and uses a dual tee. Inspect the actual package before assuming a used starter kit still contains every piece.
- 270109 and 270110 are field-serviceable cable-end connectors. The “terminate bulk cable” wording on some labels refers to fitting a connector onto the cable, not to adding a 120-ohm end-of-network terminator.
- 270114 is an inline network terminator used at a supported network-end/drop arrangement. Confirm the installation topology and proper termination before connecting devices.
- Examine pins, O-rings, seals, threads, cable strain relief and missing connector caps. Do not assume visual similarity proves electrical compatibility.
UsedRVParts inventory may include differing item conditions and packages. Review the exact listing and arrange Kelowna viewing or pickup by appointment.
Match the identified component
Open each listing to inspect item condition and what is actually included.
Related cable and network references
For cable length and tee differences, use our Ancor NMEA 2000 power, backbone and drop-cable identification guide.
Récemment consulté
Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement
Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.
Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.
Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.
Nos produits