Go Power 83296 & 83297 Parts Diagrams

Use the model label on a Go Power IC-series inverter/charger to distinguish Solar Elite 83296 from Solar Extreme 83297. Their solar-panel quantities, AC charger outputs and high-current battery cables differ, even though they use the same PWM controller family.

Solar Elite versus Solar Extreme power system

Trace each major part to see what it does before replacing it.

Solar array and battery path

Elite 400W / Extreme 600W solarSC connector leads and appropriate roof routing

30A PWM controllerRegulates solar charging of the battery

12V battery bankBattery-side fuses and correctly sized cables

GP-IC-2000 / GP-IC-3000Uses battery energy for pure sine wave AC

External AC and selected loads

Shore or generatorExternal AC source, independent from solar

IC built-in dual-leg transferPasses appropriate external AC; inverter is the other source

Selected RV AC circuitsFollow factory panel, neutral and grounding diagrams

IC internal AC battery charger100A Elite; 125A Extreme

Original functional overview, not a wire-to-terminal installation schematic. Actual inverter output and AC service conditions depend on the specific model and RV distribution layout.

How the IC-series inverter/chargers work

These systems use GP-IC-series inverter/chargers, not standalone ISW inverters. External AC can pass through their built-in transfer arrangement while the unit charges batteries from AC; without external AC, selected protected loads are supplied by the inverter. The transfer design supports two 50A legs, while total inverter power remains limited to the unit's 2000W or 3000W output.

IC is not the same product as AIC. Newer AIC-2000/3000 single-leg systems have a different 30A transfer arrangement and different harness requirements, so never assume a drop-in replacement based on wattage alone.

Elite and Extreme exact component comparison

Specification	Solar Elite 83296	Solar Extreme 83297
Solar array	2 × 200W = 400W	3 × 200W = 600W
Inverter/charger model	GP-IC-2000-12	GP-IC-3000-12
Continuous inverter output	2000W	3000W
Internal AC battery charger	100A	125A
Automatic transfer switch	Built-in, two 50A legs	Built-in, two 50A legs
PV charge controller	30A Bluetooth PWM	30A Bluetooth PWM
IC series remote	GP-ICR-50	GP-ICR-50
Battery fuse and cable kit	GP-DC-KIT4, 300A, 2/0 AWG	GP-DC-KIT5, 400A, 4/0 AWG
200W expansion	Subject to controller & array limits	Check separately; already 600W array

Match DC protection by model: Elite uses GP-DC-KIT4, 2/0 AWG with 300A Class T protection; Extreme uses GP-DC-KIT5, 4/0 AWG with 400A Class T protection. The legacy factory wiring manual can depict older lower-wattage panels, so confirm the actual module label on your 83296/83297 kit.

Find the corresponding catalog photos

The product listings below include complete kits and separately supplied component families. A package containing the same IC family is not proof that its remote or hardware matches every production revision.

Complete system kits

Go Power Go Power 83296 Solar Elite 400W system catalog photograph

Go Power 83296 Solar Elite 400W system400W solar and GP-IC-2000 inverter/charger. See listing for availability and further details.

Go Power Go Power 83297 Solar Extreme 600W system catalog photograph

Go Power 83297 Solar Extreme 600W system600W solar and GP-IC-3000 inverter/charger. See listing for availability and further details.

IC inverter/charger and DC battery kits

Go Power GP-IC-2000-12-PKG 2000W inverter/charger catalog photograph

GP-IC-2000-12-PKG 2000W inverter/charger2000W IC-series family; confirm correct package. See listing for availability and further details.

Go Power GP-IC-3000-12-PKG 3000W inverter/charger catalog photograph

GP-IC-3000-12-PKG 3000W inverter/charger3000W IC-series family; confirm correct package. See listing for availability and further details.

Go Power GP-DC-KIT4 2/0 AWG 300A cable kit catalog photograph

GP-DC-KIT4 2/0 AWG 300A cable kitElite: 2/0 AWG, 300A Class T. See listing for availability and further details.

Go Power GP-DC-KIT5 4/0 AWG 400A cable kit catalog photograph

GP-DC-KIT5 4/0 AWG 400A cable kitExtreme: 4/0 AWG, 400A Class T. See listing for availability and further details.

Panel expansion reference

Go Power Go Power OVERLANDER-E 200W panel catalog photograph

Go Power OVERLANDER-E 200W panelAdditional 200W panel for compatible Elite array configurations. See listing for availability and further details.

Go Power manufacturer diagrams and documentation

The manufacturer's system manual shows the physical PV, battery and AC arrangement. Use the exact revision of the installed inverter, controller and transfer equipment for electrical installation and terminal wiring.

Solar Elite factory wiring drawing (PDF) · Solar Extreme factory wiring drawing (PDF) · Manufacturer Elite system data · Manufacturer Extreme system data

Electrical safety: Solar panels can remain energized in daylight. Disconnect shore, generator and battery sources before work. High-current DC connections and AC transfer wiring should be performed by qualified RV electrical personnel following the factory instructions.

Identify solar charging and inverter components in an RV battery system

Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement

Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.

Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.

Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.

Nos produits

Go Power Solar Elite 83296 & Extreme 83297 Parts Guide