Manual awning hardware lift/lock handle; shown as item A1 on the OEM hardware drawing.
Dometic A&E 8500/9000 Manual Awning Parts Diagram & OEM Hardware
Find the hardware before buying the replacement. This illustrated reference covers common components of the manual Dometic A&E 8500/9000 patio awning system. It separates arm lengths, rafter components, roller pieces and small service hardware rather than treating every A&E awning as one interchangeable assembly.
Identify your exact awning hardware
Check the hardware model/label and whether your awning has tall or short arms, the original rafter shape, mounting brackets, and right/left roller end. The OEM parts list distinguishes arm and rafter assemblies even when an awning looks similar at a distance. This reference is not intended for powered 9100, WeatherPro, or case/box awnings.
OEM awning hardware parts and replacement links
Awning pull wand used to reach the pull strap on relevant manual A&E installations.
Pull strap listed with the manual roller assembly; confirm exact fabric/roller assembly before replacing.
OEM part numbers distinguish tall and short hardware configurations. Use the arm style and equipment label; not interchangeable by assumption.
OEM parts list distinguishes tall and short rafter lengths. Identify hardware length before ordering.
Tall/short variants; inspect the existing arms, model and hardware finish.
The older parts drawing identifies slider 830463. The replacement assembly is sold under 830463P (distributor number 9108608891). Match the original rafter arm and slider shape; it is different from the 830472 slider-catch assembly.
Small latch/lock component in the OEM hardware assembly.
The catch locks the moving rafter slider in position. This is separate from the rafter slider itself; identify the catch and original hardware configuration before selecting a replacement.
Bracket from the manual rafter support assembly; identify mounting style.
Adjustment knob shown in the manufacturer hardware breakdown.
Right and left roller torsion part numbers from the roller drawing. Dangerous stored spring tension; not a consumer-service instruction.
Which part should you check first?
Broken lift/lock handle: compare its shape with part 830644 before replacing. Worn rafter slider or catch: first identify the manual rafter version; a visually similar newer slider does not establish an OEM substitution. Missing pull wand or strap: verify length and where it engages the manual roller. Damaged main arm: check tall-versus-short assembly numbers, not only fabric width.
Important roller spring safety
Awning roller torsion assemblies are under dangerous stored spring tension. This page is for part identification, not for disassembling the spring, removing tension, or replacing a roller without appropriate service instructions and equipment.
Dometic installation and service manuals
The 8500/9000 installation instructions (PDF) illustrate the awning hardware and mounting arrangement. For fabric, roller-tube and torsion service, consult the Dometic 8500/9000 manual-awning service manual. Follow the instructions for your exact model and hardware version.
For whole-awning choices, browse used RV awnings or new manual/power patio awnings. Check availability and product details on each linked replacement part before ordering.
Récemment consulté
Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement
Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.
Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.
Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.
Nos produits