Conventional hub grease sealDexter 010-009-00 · Ref. 11½-inch sealing-journal size for the matching standard-grease 2,000–2,200 lb hub. One seal in this listing.
View replacement partDexter 2,000–2,200 lb Trailer Hub & E-Z Lube Parts Diagram
Dexter 2,000–2,200 lb trailer axles use compact serviceable hubs with separate bearings, seals and dust caps. Depending on the original spindle, the hub may have a conventional solid grease cap or an E-Z Lube cap with a removable rubber plug. These parts are not necessarily interchangeable. Use the axle identification and the existing bearing and seal numbers to select the right replacements.
View Available Parts With Photos
Dexter 440 / 545 hub-group parts diagram
The Dexter light-duty parts catalog includes a numbered illustration titled “440 and 545 Hub Group”, under the 1,000–2,200 lb capacity heading (printed page 12). It identifies each bearing, race, seal, spindle fastener and cap in its assembled position. The reference numbers below follow that drawing.
Open Dexter’s illustrated hub catalog (PDF)
View the manufacturer’s exploded hub drawing
Look for “440 and 545 Hub Group,” printed page 12. For easy pinch-to-zoom on a phone, open the full PDF using the link above.
Parts identified by diagram number
| Ref. | Dexter part | Component |
|---|---|---|
| 1 | 010-009-00 | Conventional grease seal, 1½-inch ID |
| 1A | 010-060-00 | E-Z Lube double-lip seal, 1½-inch ID |
| 2, 5 | 031-031-02 | L44649 inner and outer bearing cones |
| 3, 4 | 031-031-01 | L44610 inner and outer bearing cups (races) |
| 6 | 006-176-00 | Conventional spindle nut |
| 7 | 019-002-00 | Cotter pin for the specified conventional spindle |
| 8 | 021-003-00 | Standard solid grease cap |
| 8A | 021-041-01 | E-Z Lube cap with plug opening |
| 8B | 085-001-00 | Removable cap plug for E-Z Lube |
| 11 | 005-101-00 | Tang washer for earlier E-Z Lube spindle arrangement |
| 11A | 005-151-00 | Earlier E-Z Lube spindle washer |
| 12 | 005-023-00 | Later E-Z Lube spindle washer |
| 29 | 006-190-00 | Later E-Z Lube spindle-nut retainer |
| 30 | 006-191-00 | Later E-Z Lube special jam nut |
Conventional grease seal or E-Z Lube seal?
A standard-grease hub uses the 010-009-00 seal. The matching E-Z Lube 2K hub uses the 010-060-00 double-lip seal. Both are listed by Dexter with a 1½-inch sealing diameter, but they have different service numbers and intended spindle arrangements. Match the original seal style and journal before ordering.
Check the bearing and race markings
In the illustrated 440/545 hub group, the 031-031-02 L44649 bearing cone appears at both inner and outer positions, with an L44610 bearing cup (031-031-01) at each position. The cones and cups are separate components. Dexter also specifies L44643 bearing versions for some 2K hubs with different spindle dimensions, so capacity alone is not sufficient to choose the bearings. Compare the original stamped numbers.
Choose the correct dust cap and plug
The standard-grease hub uses a solid 021-003-00 dust cap. The 021-041-01 E-Z Lube metal cap has a centre opening for the 085-001-00 rubber plug. If replacing the cap, check the hub's diameter and whether its spindle has an E-Z Lube grease fitting.
5-on-4½-inch hubs for different wheel sizes
Dexter also distinguishes its 2K five-lug hubs by the intended wheel diameter. The factory kit table below identifies different hub castings for 8–12-inch wheels and 13–15-inch wheels; all four examples use a 5-on-4½-inch bolt circle and ½-inch wheel studs. Choose the correct hub profile as well as the right lubrication style.
| Dexter kit | Lubrication | Wheel size | Hub | Seal | Cap |
|---|---|---|---|---|---|
| K08-259-91 | Standard grease | 8–12-inch wheels | 008-259-05 | 010-009-00 | 021-003-00 |
| K08-259-92 | E-Z Lube | 8–12-inch wheels | 008-259-10 | 010-060-00 | 021-041-01 |
| K08-258-91 | Standard grease | 13–15-inch wheels | 008-258-05 | 010-009-00 | 021-003-00 |
| K08-258-92 | E-Z Lube | 13–15-inch wheels | 008-258-10 | 010-060-00 | 021-041-01 |
Open Dexter’s complete hub-kit catalog (PDF) for the individual kit contents.
Spindle-nut hardware and maintenance
Dexter’s early E-Z Lube spindle arrangements used different washers from the later versions. A tang washer, nut retainer and jam nut are not interchangeable without checking the actual spindle design. Follow Dexter’s instructions for bearing adjustment and grease application, inspect the cups and cones together, and replace a removed seal as required during hub service.
Other Dexter hub and brake guides
For the next axle size, see the Dexter 3,500 lb hub guide. The 5,200–6,000 lb hub guide and 7,000 lb 865 hub guide cover different bearings and seals. Do not select wheel-end parts from another axle group by their appearance alone.
Find hub replacement parts by photograph
Conventional hub grease sealDexter 010-009-00 · Ref. 1
E-Z Lube double-lip sealDexter 010-060-00 · Ref. 1AThe E-Z Lube 1½-inch seal for the matching 2K hub. The product listing supplies a pack of two.
View replacement part
L44649 tapered wheel bearingDexter 031-031-02 · Ref. 2 & 5An L44649 bearing cone, shown in the 440/545 hub parts drawing at both the inner and outer positions. Cup sold separately.
View replacement part
E-Z Lube metal hub capDexter 021-041-01 · Ref. 8AGrease cap with the centre opening used with the removable rubber plug on an E-Z Lube spindle.
View replacement part
Rubber grease-cap plugDexter 085-001-00 · Ref. 8BRemovable rubber cover for the centre opening of the matching E-Z Lube grease cap.
View replacement partRécemment consulté
Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement
Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.
Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.
Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.
Nos produits