B&B RV TV Coax Cable Entry Plates: Single, Dual & Covered

An RV TV-cable entry plate provides a protected outside connection for coaxial cables. B&B Molders makes small circular plates, rectangular two-coax plates and hinged compact enclosures. The right replacement depends on the number of connectors, face shape and wall opening.

Compare the cable-entry styles

Choose the connector and door arrangement

Round single-coax plates — 94320 and 94321

The factory catalog lists a 1-inch circular wall cutout and a 3 1/8-inch outer plate diameter for these two models. They use the same general single-coax style in white or black. They are not the same as the separate hinged compact enclosure below.

Rectangular dual-coax plate — 94323

For two coaxial connections on a rectangular face, 94323 has a 3 × 4-inch outside plate. Confirm the existing opening and connector arrangement rather than using the outer size as the wall-cutout measurement.

Hinged compact enclosures — 94324 and 94326

These have closing hinged covers over the connector area. 94324 has two coaxial connections and a polar-white face; 94326 is the black single-connection version. Their outer diameter alone does not confirm that they mount into the same wall opening as a simple coax plate.

Replacement dust cap

B&B also lists 94208, a polar-white rubber cap for a matching TV-cable plate. Identify the connector and cap mounting arrangement before ordering the cap separately; a loose cap is not an entire exterior plate.

Compare the actual listed products

94320 — Single TV coax plate — polar white

View 94320 product

94321 — Single TV coax plate — black

View 94321 product

94323 — Dual coax rectangular entry plate — white

View 94323 product

94324 — Dual coax compact enclosure — white

View 94324 product

94326 — Single coax compact enclosure — black

View 94326 product

94208 — White TV coax connector dust cap

View 94208 product

Before replacing the outside cable connection

1. Count the coaxial connections and confirm they are the same type as your current hookup.
2. Measure the outside plate and the existing wall opening independently.
3. Check whether the original has a hinged cover, screw-on dust cap or another weather shield.
4. Protect the RV wall opening from moisture according to the original installation instructions; preserve cable sealing and strain relief.

Manufacturer connector illustrations

See the B&B Molders illustrated parts catalog (PDF), printed pages 52–53, for the manufacturer's original part-number and component drawings. The PDF may open separately on mobile.