B&B RV Pocket Door Guides 94158 & 94159: Replacement Parts

An RV pocket or sliding interior door needs guides to keep its lower edge aligned as it moves. B&B Molders lists two versions of the same nonadjustable door-guide design: 94158 black and 94159 tan/oak. Both are intended for a matching in-frame sliding door, rather than a hinged entrance or compartment door.

Find the matching guide

Identify the guide before ordering

These are fixed, nonadjustable plastic guides. Match the shape, door-channel clearance, mounting holes and colour with the original guide. A nominal 1 3/8-inch maximum door thickness does not guarantee fit for every sliding-door track arrangement.

Where the guide belongs in the door system

The products below are the lower guide only. They are not overhead hangers, rollers or a complete track kit.

Product photographs

94158 — Black RV interior sliding-door guide

View 94158 product

94159 — Tan/oak RV interior sliding-door guide

View 94159 product

Simple replacement checks

1. Measure the thickness and bottom clearance of the existing sliding door.
2. Compare the old guide's shape and fastener positions to the replacement photograph.
3. Inspect the overhead rollers or track if the door also sags or binds; a new bottom guide alone may not correct that problem.
4. Align the replacement guide so the door moves freely without rubbing, according to the original door installation.

Manufacturer parts reference

See the B&B Molders illustrated parts catalog (PDF), printed page 77, for the manufacturer's original part-number and component drawings. The PDF may open separately on mobile.