94347 — Titus T1 water-management panel — black
Two-coax Titus T1 configuration, OEM 301-043-00004.
View 94347 productB&B Titus T1 94347 RV Water Panel: Ports, Fit & OEM Reference
B&B Molders' Titus T1 94347 groups several RV service connections at one exterior panel instead of spreading them across multiple wall fittings. The black 94347 model has city-water access, a tank-flush connection, a water-service connection used for tank flushing, tank filling or winterizing according to the RV's plumbing, and two coaxial cable connections.
Identify the 94347 panel
| Specification | Titus T1 94347 |
|---|---|
| B&B aftermarket number | 94347 |
| Original OEM number | 301-043-00004 |
| Finish | Black |
| Required wall cutout | 5 × 6¾ inches |
| Outside trim dimensions | 6¾ × 8½ inches |
| Coax connections | Two |
| Water connections | City water, dedicated tank flush, and multifunction tank fill/flush/winterizing connection |
City-water connection
Pressurized supply connection
Tank flush connection
Dedicated rinse-water circuit
Service-water connection
Tank flush, tank fill or winterizing function according to the installed plumbing
Two coax connections
Separate TV / cable signal pass-throughs
Functional identification only — these boxes do not represent the ports' physical arrangement on the panel.
Compare the Titus T1 configurations
Titus T1 panels share an exterior size but not necessarily the same connection layout. The OEM part number matters, particularly when the original installation includes coax pass-throughs or special tank-flush plumbing.
| T1 model | Coax ports | What distinguishes it |
|---|---|---|
| 94400 | None | City water, tank flush and multifunction service-water connection |
| 94401 | One | Tank-flush connection with check valve; multifunction service-water connection |
| 94347 | Two | City water, tank flush and multifunction service-water connection |
| 94402 | Four | City water, tank flush and multifunction service-water connection |
See the matching 94347 panel
How to confirm the correct replacement
- Check the original panel or RV documentation for 94347 or 301-043-00004.
- Measure the wall cutout and the exterior trim separately.
- Count the coax fittings and identify each water connection by its function. Do not connect a potable-water supply to a dedicated wastewater rinse circuit without the required protection.
- Compare the plumbing behind the panel before disconnecting any lines; use the RV manufacturer's installation and winterizing procedure.
Manufacturer model reference
Compare the original manufacturer drawings and part numbers in the B&B Molders Titus T1 model chart and panel illustrations (printed page 17).
The Titus T1 is a different panel family from the Nautilus P1 and Nautilus P3. Match the original model rather than relying on a similar water-service function.
Récemment consulté
Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement
Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.
Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.
Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.
Nos produits