011-398 — Flexible ¾-inch screw cover

Polar white, 50-foot roll
View partIdentify flexible RV vinyl screw-cover inserts by the original AP Products number, nominal width, profile family, finish and roll length. These inserts fit into a compatible aluminum molding channel to cover exposed screw heads. They are not the metal roof-edge molding itself, nor a substitute for properly installed butyl tape or external joint sealant.
AP Products lists the current flexible screw-cover product families in its manufacturer screw-cover index. The official illustrated catalogs show insert and molded-cover cross sections for comparison. Use the parts key below to compare insert widths and styles with the original molding.
011-398 polar white or 011-399 black, 50-foot rolls. Factory labels them flexible screw covers; a 1-inch economy insert is not the same size.
011-407 polar white, 50 ft. Black 011-408-25 appears as a 25-foot catalog SKU; AP's current index separately lists 011-408 at 50 ft, so check package contents.
011-306 white 100 ft, 011-331 colonial white 50 ft, 011-311 white 1,000 ft and 011-312 black 1,000 ft. Exact roll length is part-number-specific.
011-444 is a separate manufacturer-listed insert-molding trim roll. Do not assume it has the same cross-sectional edges as flexible 011-398/399.

Polar white, 50-foot roll
View part
Black, 50-foot roll; same nominal width, different finish
View part
Polar white, 50-foot roll; wider than ¾-inch
View part
25-foot black roll; corroborated by suppliers, not separately shown in current manufacturer index
View part
White, 100-foot roll; original RV vinyl insert family
View part
Colonial white, 50-foot roll; not the same colour as polar white
View part
White, 1,000-foot manufacturer-listed bulk roll
View part
Black, 1,000-foot manufacturer-listed bulk roll
View part
Polar white, 200-foot manufacturer-listed roll; verify the insert cross section against channel
View partThe 011-408-25 listing is for a 25-foot roll, while AP Products lists 011-408 as the 50-foot version. Both are black and 7/8 inch wide, but the roll lengths and part numbers are different. Check the molding profile and the length needed for your repair before ordering.
Measure the existing removed insert and the profile it clips into, including the distance between the retaining edges. Flat trim with an insert channel, long-leg corner molding and gutter rail can use different track widths. A nominal strip width by itself is not proof of fitment. See the aluminum roof-edge, corner and gutter trim guide for exact metal extrusion numbers.
Inspect the original channel for corrosion, screw heads protruding beyond the receiver, cracks or deformation before fitting a new strip. Replacement screw-cover vinyl conceals the fasteners; it does not replace the underlying roof-joint water seal or repair a leaking screw hole.
If a particular cover resembles a Philips, Elixir or Hehr rigid style rather than a flexible roll, consult the historical illustrated AP Products hardware catalog (PDF) and the current maker index before ordering. That older catalog also identifies 5/8-inch and 7/8-inch rigid profiles, which have different mounting edges from the flexible rolls above. Bulk 1,000-foot spools are listed because they are exact store products, not because they are the best quantity for a single RV.
Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.
Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.
Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.
Nos produits