If your RV has two closely spaced tires on one side, Stromberg Carlson's T-Chock fits between them and expands to help reduce rocking when parked. It is not a tire-leveling ramp and does not replace ordinary wheel chocks used to restrain the trailer against rolling.

Select the single or double package

Manufacturer part number What comes in the package Use
JBP-T217.1 One adjustable T-Chock and a wrench For one suitable gap between adjacent tandem tires
JBP-T217.2 Two adjustable T-Chocks and a wrench For two suitable gaps, such as the two sides of a tandem-axle trailer
JBP-T217.W (manufacturer reference) Replacement wrench only Service component; not a complete T-Chock

Both T-Chock packages use the manufacturer's 2- to 17-inch tire-spacing range. Measure the clear distance between the facing tire surfaces at the intended installation height, not the axle centre-to-centre spacing. The number of chocks in the package does not change that range.

How the assembly works

Tandem-axle T-Chock — component positioning

1Forward trailer tire

One opposing surface for the chock's first pad.

2Adjustable T-Chock body

Expands between the two tires to apply stabilizing pressure.

3Rear trailer tire

Provides the other opposing surface; check the fit at the intended placement.

4Adjustment wrench

Used to expand or release the chock according to Stromberg's installation directions.

This simplified identification view does not represent an installation angle or tire-clearance template.

Why it differs from a wedge chock

A conventional wedge chock sits at the tire-ground contact area to help prevent the trailer moving. A T-Chock fits between two tandem tires to reduce movement through the suspension while occupants are inside. The T-Chock has a rust-resistant finish and includes a handle for placement and removal.

Matching T-Chock product photos

Check fit before purchasing

  1. Confirm the RV has a suitable tandem-tire arrangement. This is not a single-axle wheel chock.
  2. Measure the available gap between facing tires, with the trailer at its normal parked ride height.
  3. Check for nearby brake lines, fenders or other components that could interfere with the T-Chock.
  4. Use the wrench to set the stabilizing pressure specified in the instructions; do not use the device to lift or spread the axles.
  5. Remove every T-Chock before moving the trailer.

Factory documentation

See Stromberg's T-Chock model chart, illustrations and installation manual for the single, double and replacement-wrench models. The 2026 Stromberg Carlson catalog (printed page 12) also identifies the 2–17-inch operating span.

For a product that raises the tire for leveling, compare the JBP-C300/JBP-C302 curved leveler guide.

Visto recientemente

Inventario de piezas para vehículos recreativos nuevo y actualizado: consulte con frecuencia

Siempre estamos agregando piezas de RV nuevas y usadas a nuestro inventario, así que asegúrese de volver a consultarlo periódicamente.

Si no ve la pieza que necesita hoy, es posible que aún la tengamos en stock: nuestra base de datos interna incluye miles de piezas de vehículos recreativos nuevas que aún no están publicadas en línea.

Envíenos un mensaje de texto o correo electrónico con el número de producto o modelo y verificaremos la disponibilidad de inmediato.

Nuestros productos

Boletín informativo de piezas para vehículos recreativos

¡Regístrate para próximas promociones!