Friction hinge
2020102629 — 5-leaf friction hinge kit, black
Lippert identifies this black friction hinge in its five-leaf group; confirm original hinge geometry and door series.
Lippert RV Entry Door Hinges and Frame Seal Parts Reference
Identify Lippert RV entry-door hinges and inner-frame seals using the manufacturer's 5-leaf, 6-leaf and friction-hinge part numbers. A standard leaf hinge is not interchangeable with a controlled-motion hinge simply because it has the same colour. Check the actual door series, number of leaves, pin axis and original mounting before replacing.
Lippert entry-door hinge illustrations
Lippert's RV Entry Door Components CCD-0002306, revised September 20, 2024 contains the actual hinge and door component illustrations. Open the factory sheet to compare hinge shape, leaf count and the original versus updated six-leaf friction hinge.
View official hinge and entry-door parts illustrations (PDF)
The mechanical drawing remains at the manufacturer. Use the part photos and manufacturer drawing to compare hinge leaves, pins and mounting details.
Hinge identification by leaf count
206607 white, 235384 black. Count the actual hinge sections and compare the existing pin and mounting.
2020102629 black, with related white 2020109835. Controlled motion requires the correct door and hinge arrangement.
198295 white and 204758 black, distinct from the controlled-motion part numbers.
258547 white and 258548 black. Lippert's illustrated parts sheet also lists other finish variants; verify the exact hinge revision.
Matching hinge listings and product photos
Standard hinge
198295 — 6-leaf entry-door hinge, white
A six-leaf white replacement hinge. Lippert records 207251 as a superseded identifier; not a friction upgrade by assumption.
Friction hinge
258548 — 6-leaf controlled-motion hinge, black
A six-leaf black friction hinge for Lippert entry doors; manufacturer notes it is replacement-only and mounting hardware is not included.
Door rubber seal: 250947 → 2020218613 manufacturer supersession
Lippert's TI-253 replacement bulletin (PDF) identifies the earlier 250947 seal. Lippert's current technical product specification explicitly states that 2020218613 supersedes 250947, with a nominal 0.63 × 0.497-inch profile and black EPDM material. The current number is sold by length, so check the manufacturer's specified quantity and your actual door perimeter rather than assuming a package includes enough for an entire door. Compare the original frame-seal number and required length before ordering. Do not substitute an adhesive door seal solely because its visible profile looks similar.
Before ordering a hinge or seal
Record the door manufacturer, hinge leaf count, actual hinge finish, door series, screw pattern and whether the original hinge is friction/controlled-motion. Inspect the original six-leaf style rather than inferring a replacement from a similar product photograph. The manufacturer notes that 258548 is a replacement-only hinge and its mounting hardware is not included.
Safety: Support the door before removing hinge fasteners. Avoid pinching fingers in the hinge leaves. After repair, test closure, emergency exit and weather sealing before travelling. Follow the manufacturer's bulletin for the seal procedure.
Find other entry and screen-door replacement parts or compare current Lippert hinge specifications.
Visto recientemente
Inventario de piezas para vehículos recreativos nuevo y actualizado: consulte con frecuencia
Siempre estamos agregando piezas de RV nuevas y usadas a nuestro inventario, así que asegúrese de volver a consultarlo periódicamente.
Si no ve la pieza que necesita hoy, es posible que aún la tengamos en stock: nuestra base de datos interna incluye miles de piezas de vehículos recreativos nuevas que aún no están publicadas en línea.
Envíenos un mensaje de texto o correo electrónico con el número de producto o modelo y verificaremos la disponibilidad de inmediato.
Nuestros productos