Battery boxes and trays can look similar after years of service, but their Moeller part numbers specify different battery limits and restraint types. Identify whether the original setup is a covered box, a tall tray with hold-down rods or a low strap-style tray before looking for a replacement.

Identify the original type

Covered battery box

Houses the battery within a lidded case. Confirm case size, terminals, cable routing and strap arrangement.

Hold-down rod tray

Open tray with vertical stainless rods and securing knobs. Different MPNs have different battery size limits.

Strap-style tray

Shallow base using a quick-release buckle and strap. Not interchangeable with rod hardware without checking installation.

Moeller box part numbers and outer dimensions

Match the case size and group marking to the original enclosure. Dimensions below are the manufacturer's unpacked outer measurements.

MPN Battery group Unpacked outer L × W × H (in) Max battery L × W × H (in) Restraint
042213 Group 24 14.19 × 9.69 × 10.50 10.50 × 7.00 × 8.37 Lidded box with strap and hardware
042214 Group 27, 29 & 31 16.63 × 9.63 × 10.50 12.75 × 7.00 × 9.00 Lidded box with strap and hardware
042204 Group 4D 23.75 × 12.50 × 13.38 Confirm battery dimensions Lidded box; check hold-down parts

Find the correct tray by number and fastener style

The 042215/042232/042216 tray family is rod-secured, while 042233/042234 is strap-style. Compare the case and base measurements.

MPN Battery group Unpacked outer L × W × H (in) Max battery L × W × H (in) Restraint
042215 Group 24 12.88 × 7.38 × 9.00 10.25 × 6.75 × 8.12 Stainless hold-down rods; knobs
042232 Group 27 14.38 × 7.13 × 10.50 11.75 × 6.75 × 7.75 Stainless hold-down rods; knobs
042216 Group 29 & 31 15.50 × 8.00 × 10.50 13.00 × 7.43 × 10.00 Stainless hold-down rods; knobs
042233 Group 24 11.31 × 7.25 × 1.31 10.25 × 6.75 × 8.12 Quick-release buckle and strap
042234 Group 27 12.94 × 7.25 × 1.31 11.75 × 6.75 × 7.75 Quick-release buckle and strap

For 042234, the tray measurements and strap-style construction are cross-checked against published model-specific supplier data; verify any installation where clearance is critical.

What to measure before replacing an older tray

Measure the actual battery case without relying solely on a Group 24, 27 or 31 label. Note the maximum length, width and height, the terminal clearance and the original mounting holes. If the battery sat in a lidded box, confirm where the cover and cable exits were positioned. A strap tray and a rod tray are not like-for-like installations.

Case dimensions matter more than the group label

Moeller specifies different battery limits for its Group 24 covered box and Group 24 rod/strap trays. The same group marking does not make all three installations interchangeable.

Compare the matching product listings

Open a matching part number to see its listed condition and availability; viewing and pickup are by appointment.

Moeller 042216 rod-secured tray product listing image

Moeller 042216

Group 29 & 31 · A larger open tray for selected Group 29 and 31 batteries; compare all three dimensions.

Check listing and availability

Related marine electrical references

Identify Attwood bilge pump parts · Identify marine light sockets

UsedRVParts viewing and pickup in Kelowna are available by appointment.

Visto recientemente

Inventario de piezas para vehículos recreativos nuevo y actualizado: consulte con frecuencia

Siempre estamos agregando piezas de RV nuevas y usadas a nuestro inventario, así que asegúrese de volver a consultarlo periódicamente.

Si no ve la pieza que necesita hoy, es posible que aún la tengamos en stock: nuestra base de datos interna incluye miles de piezas de vehículos recreativos nuevas que aún no están publicadas en línea.

Envíenos un mensaje de texto o correo electrónico con el número de producto o modelo y verificaremos la disponibilidad de inmediato.

Nuestros productos

Boletín informativo de piezas para vehículos recreativos

¡Regístrate para próximas promociones!