Trying to match an existing DuraPatchUV packet or replace a partial sheet? Dutton-Lainson identifies the product by both a five-digit manufacturer number and a DP model code. The family contains four different sheet sizes, all activated by UV light, so the right selection begins with the original package and the dimensions of the repair.

Identify DuraPatchUV by manufacturer number

MPN Model Nominal dimensions Uncut area
56711 DP23 2 × 3 in 6 sq in
56712 DP36 3 × 6 in 18 sq in
56713 DP69 6 × 9 in 54 sq in
56714 DP912 9 × 12 in 108 sq in

The smallest version, 56711 / DP23, measures 2 × 3 inches. The following numbers increase in size: 56712 / DP36 at 3 × 6 inches, 56713 / DP69 at 6 × 9 inches, and 56714 / DP912 at 9 × 12 inches. All dimensions refer to the uncut patch, not the final coverage after trimming.

Material and repair suitability matter. Dutton-Lainson says DuraPatchUV bonds to various substrates including polyethylene, fiberglass, metal, glass and wood, but specifically excludes polypropylene. Identify the actual surface material before ordering. The product description alone does not establish suitability for structural repairs, a pressurized system or potable-water-contact use.

What to check before replacing or using the patch

  1. Confirm the number on the foil pouch. The DP code and five-digit MPN are more reliable than guessing from the approximate packet size.
  2. Measure the original sheet. Compare its full width and length with the four sizes; a partially cut sheet cannot be reliably identified from what remains.
  3. Identify the substrate. The manufacturer lists polyethylene among its supported bonding surfaces but excludes polypropylene. Determine the actual tank, panel or housing material rather than assuming all plastics are equivalent.
  4. Check the storage condition. UV exposure cures the material. Keep unused patches protected in the original foil packaging and do not use a sheet that has hardened prematurely.
  5. Read the application sequence. Clean and dry the surface, apply the resin side firmly, then remove the outer film and expose the repair to UV or sunlight according to the instructions.
  6. Check the use case. A patch is not automatically approved for a drinking-water tank, pressurized line, structural component or an RV roof membrane. Review the repaired component's requirements first.

Distinguish it from ordinary repair tape

DuraPatchUV is a reinforced sheet that cures hard in UV light. It is not the same kind of product as a flexible, pressure-sensitive roof-sealing tape. Choose repair materials by substrate and service requirements rather than treating adhesive products as interchangeable.

Product images and matching DuraPatchUV listings

All four UsedRVParts records are tagged Brand New. Open each product for its current availability, package contents and fulfillment options. Viewing or pickup of eligible items in Kelowna is by appointment.

Other related RV repair references

For repairs that involve a specific roof membrane or fresh-water tank assembly, also check roof-membrane-specific repair tapes, and ABS fresh-water tank references for those separate systems. These parts are not automatically compatible with the DuraPatchUV material.

Visto recientemente

Inventario de piezas para vehículos recreativos nuevo y actualizado: consulte con frecuencia

Siempre estamos agregando piezas de RV nuevas y usadas a nuestro inventario, así que asegúrese de volver a consultarlo periódicamente.

Si no ve la pieza que necesita hoy, es posible que aún la tengamos en stock: nuestra base de datos interna incluye miles de piezas de vehículos recreativos nuevas que aún no están publicadas en línea.

Envíenos un mensaje de texto o correo electrónico con el número de producto o modelo y verificaremos la disponibilidad de inmediato.

Nuestros productos

Boletín informativo de piezas para vehículos recreativos

¡Regístrate para próximas promociones!