Identify C.E. Smith 27200–27310G Trailer Spare Tire Mounts

When replacing a missing spare-wheel carrier on a boat trailer, the type of bracket and fastener arrangement can identify the original C.E. Smith model. An exposed U-bolt, a bracket-retained U-bolt, a longer U-bolt and a welded offset carrier may all support a spare, but they are not identical replacements.

Identify the carrier by MPN and mounting style

Part 27200 is a short 8¾-inch U-bolt with nuts. 27201 uses retaining brackets. 27206A is a 12-inch U-bolt intended for greater reach. 27310G is the offset, heavy-duty galvanized side carrier with a welded bracket.

What to examine on the original mount

1. Look for a number or distinctive fitting. Check the carrier body and retained hardware. A loose U-bolt does not establish the exact model on its own.
2. Identify the retention method. Two simple retaining nuts point toward the 27200 or longer 27206A style; the 27201 uses spin-on bracket retainers.
3. Measure U-bolt reach. An 8¾-inch short carrier and the 12-inch 27206A suit different mounting clearance needs. Confirm the full original arrangement rather than relying on frame width alone.
4. Look for a welded offset bracket. The 27310G lifts the spare approximately 5 inches and offsets it 4½ inches sideways. Check which clamp and wheel bolts are still present.
5. Confirm spare wheel compatibility. Count lugs and measure bolt circle, wheel size, tire clearance and actual frame dimensions. The 27310G does not accommodate 5-on-5 or 5-on-5½ bolt patterns.
6. Inspect condition and included parts. Replace distorted or corroded hardware and review each product listing for the exact components supplied before ordering.

Exact C.E. Smith part listings

These UsedRVParts products are catalogued as Brand New. Check each listing for current condition, availability and delivery or appointment-pickup options. The store name alone does not establish that a part is used.

C.E. Smith 27200

Standard U-bolt carrier · 8¾-in U-bolt

Two nuts; zinc plated

Check matching listing

C.E. Smith 27201

U-bolt with retainers · Short U-bolt

Two spin-on retaining brackets; zinc plated

Check matching listing

C.E. Smith 27206A

Extended U-bolt carrier · 12-in U-bolt

Two nuts; zinc plated

Check matching listing

C.E. Smith 27310G

Heavy-duty offset carrier · 5-in rise; 4½-in side offset

Carrier body and mounting hardware; hot-dip galvanized

Check matching listing

Other trailer hardware reference guides

If the part you are replacing belongs elsewhere on the trailer, see our square U-bolt identification, winch-strap identification and transom-strap identification cover other hardware. The square U-bolts in the first guide are not assumed to replace any carrier's original fasteners.