Replacing an inverter cable kit or adding a Go Power inverter? These three model numbers correspond to different cable gauges and high-current fuse sizes. Match the installed inverter's DC rating and factory instructions before ordering a kit.
Battery, fuse and inverter connection overview
In a correctly protected installation, the positive lead is fused close to the battery and the negative lead returns to battery negative. This simplified drawing identifies the components; the manufacturer's manual governs polarity, mounting, conductor selection and torque.
Compare cable gauge and fuse ratings by kit
Go Power's model-selection table lists the following for 12V inverter output ratings. These are general manufacturer selection ranges, not universal compatibility with every inverter. A 24V system can require a different kit and wiring specification.
| Model | 12V inverter size | DC protection | Battery cable | Cable length |
|---|---|---|---|---|
| GP-DC-KIT3 | 1,100–1,800W | 200A fuse block | #2 AWG | 10 ft |
| GP-DC-KIT4 | 2,000–2,500W | 300A fuse block | 2/0 AWG | 10 ft |
| GP-DC-KIT5 | 2,600–3,000W | 400A fuse block | 4/0 AWG | 10 ft |
The kits include 10-foot battery cables, the fuse block, cable ties, clamps and mounting screws. For GP-DC-KIT3 the fuse block is FBL-200, for KIT4 it is FBL-300, and for KIT5 it is FBL-400. The kit does not replace a separate inverter chassis-ground connection.
Product photographs and numbered kits
The links below open the corresponding exact-number products in this store. Inverter models are shown as application examples, not included in the cable kits.
Battery cable and fuse kits
Related inverter/chargers
Original Go Power installation information
The manufacturer's installation documentation provides the true fuse-block and battery-terminal drawing, kit comparison, polarity checks and connection instructions. Use it before installation.
Go Power inverter DC kit specifications and manuals
See the inverter cable and battery-protection component layout