Identify Fastec Industrial (FIC) and WESCO 43610-series RV entry-door locks separately from Fastec precut keys and blanks. This guide is a parts-and-key-code identification aid, not an instruction to replace safety-critical lock cylinders without checking the installed equipment.

Original product and key references

Compare the lock's original model and key markings with AP Products' hardware catalog index. Its earlier catalog lists Fastec 013-691302, 013-691303 and 013-691306 as separate key codes 302, 303 and 306. Check the key's stamped code, precut or blank format, and the quantity supplied before ordering.

Use the manufacturer's key-code table to identify the correct key and compare its shape with the product photographs below.

Important historical FIC deadbolt-cylinder recall — 13E039

Fastec and the U.S. National Highway Traffic Safety Administration issued a recall involving certain FIC deadbolt locks sold from January 2006 through April 2013, including the historical 43610, 40610 and 44610 families and certain key-code/lock-cylinder combinations. The defect can cause the deadbolt to jam and prevent occupants from opening the entry door from inside.

Review the official Fastec/NHTSA owner recall notice (PDF) and manufacturer recall documentation (PDF) to identify potentially affected older cylinders and the stated remedy. Not every 43610-style lock is necessarily part of the recalled production. Conversely, a current retail listing, replacement key or "-SP" suffix does not prove that an old installed lock has been remedied.

If an installed lock may be affected, do not rely on a replacement key as the recall fix. Contact the manufacturer or an authorized RV service professional for the correct remedy. Check safe emergency egress before travel.

Fastec locks, keys and replacement hardware

WESCO/FIC lock

43610-00-SP — Chrome/silver entry-door deadbolt latch

Product photograph: 43610-00-SP Chrome/silver entry-door deadbolt latch

WESCO/Fastec 43610-series entry lock. Compare the latch opening, strike, door thickness and exact lock marking. If the original lock is subject to a safety recall, follow the manufacturer's recall remedy rather than relying on a similar-looking replacement.

View matching product
WESCO/FIC lock

43610-09-SP — White entry-door deadbolt latch

Product photograph: 43610-09-SP White entry-door deadbolt latch

White WESCO/Fastec replacement listing. Confirm latch cutout, door thickness, inside release, model marking and manufacturer replacement status.

View matching product
Fastec precut key

013691302 — Code 302 Fastec-logo key

Product photograph: 013691302 Code 302 Fastec-logo key

Fastec-logo precut key for code 302, listed under AP Products number 013-691302. Check the code on your original key and the matching key profile before ordering; a different FIC key code will not operate the same lock.

View matching product
Fastec precut key

013691303 — Code 303 Fastec-logo key

Product photograph: 013691303 Code 303 Fastec-logo key

Distinct key code 303; not a substitute for 302 or another FIC code.

View matching product
Fastec precut key

013691306 — Code 306 Fastec-logo key

Product photograph: 013691306 Code 306 Fastec-logo key

Fastec code 306 in AP Products' historical part-number table. Match exact stamped code and key profile.

View matching product
FIC key blank

T800 — FIC-logo uncut key blank

Product photograph: T800 FIC-logo uncut key blank

A blank key listing is not a precut replacement. Have the key profile verified and cut by an appropriate locksmith.

View matching product

Key-code selection: match all three identifiers

1. Lock brand

Locate the FIC/Fastec marking. Bauer, Global and FIC key blanks or cylinders are not assumed interchangeable.

2. Original stamped code

Use the exact key code on the original key or lock documentation. Codes 302, 303 and 306 are different; a visually similar key may not operate the cylinder.

3. Key format

Distinguish a precut coded replacement from a blank that must be cut. Check whether the listing supplies a single key or a multi-key package.

What to verify before replacing a door latch

Record the model stamped on the existing entry lock, manufacture period, door thickness, cutout, mounting-hole pattern, strike/keeper and inside emergency-release design. Check that both spring latch and deadbolt release correctly with the door open before closing it.

For the separate Bauer versus Global entry-lock guide, compare replacement-cylinder families. For screen-door and striker parts, use the door-components reference.

Visto recientemente

Inventario de piezas para vehículos recreativos nuevo y actualizado: consulte con frecuencia

Siempre estamos agregando piezas de RV nuevas y usadas a nuestro inventario, así que asegúrese de volver a consultarlo periódicamente.

Si no ve la pieza que necesita hoy, es posible que aún la tengamos en stock: nuestra base de datos interna incluye miles de piezas de vehículos recreativos nuevas que aún no están publicadas en línea.

Envíenos un mensaje de texto o correo electrónico con el número de producto o modelo y verificaremos la disponibilidad de inmediato.

Nuestros productos

Boletín informativo de piezas para vehículos recreativos

¡Regístrate para próximas promociones!