Fan-Tastic Vent Create-A-Breeze 8000 / 1200 Parts Diagram

The Fan-Tastic Vent Create-A-Breeze Model 8000 is a 12-volt RV roof fan with manual lid lifting and three fan speeds. The later model-number designation is 1200. Its original parts drawing identifies separate assemblies for the dome, fan motor, lid switch, lift arm, controls and removable interior screen. Before ordering, check the model label and compare the existing component with the matching part shown below.

Shop common 8000-series replacement parts

Replacement fan motorK8017-00

Fan motor kit; check existing can-style or pancake-style assembly before ordering

View this part

Dome lift arm kitK8011-05

Metal lift arm and mounting hardware for opening the roof lid

View this part

Dome safety switchK1122-05

Plunger-style switch that senses the roof lid position

View this part

Three-speed fan switchK1031-05

Rotary operating switch for the original three-speed controls

View this part

Interior screen assemblyK2035-81

White replacement screen frame with insect screen

View this part

Black dome crank knobK1140-09

Replacement knob for the manual roof-lid lift mechanism

View this part

Original parts drawing and reference numbers

Use the lettered locations on the Fan-Tastic Create-A-Breeze exploded drawing to identify the assembly you need. Then select its part number in the table; linked part numbers open their listings on UsedRVParts.

The K8011-05 dome lift arm kit is available as a model-8000 service part; the early illustration labels its lift-arm position as 1011-05. Match the shape, fasteners and the roof-lid mechanism when replacing an older arm.

Which fan motor is installed?

Earlier Create-A-Breeze vents used both can-style and pancake-style fan motors. The mounting arrangement and fan-blade shaft are important: the parts drawing also separates 7 mm and 8 mm fan-blade versions. Dometic K8017-00 is listed for the 8000-series fan, but compare your existing motor and electrical connections before selecting it. Do not choose a blade solely by diameter.

Fan-Tastic 8000 / 1200 wiring schematic

The original Fan-Tastic Vent schematic labels both model numbers and shows the 12-volt supply, dome switch and pancake-style fan motor connections. It is particularly useful for identifying the dome switch and motor wiring before servicing an older unit.

Open full wiring diagram (PDF)

Other available service components

The K9018-09 fuse holder is listed at position E2 of the original parts diagram. A K1060-81 six-inch white trim garnish is also available for applicable 8000-series installations; compare the original trim depth and mounting profile.

Care and replacement tips

Turn off the fan and disconnect its 12-volt power supply before handling the switch or motor. For screen cleaning, release the Pop N' Lock screen, wash it with mild, non-abrasive soap and allow it to dry before refitting it. When replacing a lid or seal, inspect the original hinge and frame profile rather than relying on the 14-inch opening size alone.

More roof-fan parts guides

For another roof-fan design, see the MAXXFAN Plus 4500K powered-lid parts guide or the MAXXFAN Deluxe parts drawing. These are separate MAXXAIR systems, not interchangeable versions of the Fan-Tastic 8000.