94329 — Deluxe round hatch — polar white
5⅛-inch outer face with 3½-inch cutout and a covered-back arrangement.
View 94329 productB&B Round RV Electrical Cord Hatches: 94328–94332 Parts & Fit
When a round RV shore-power cable hatch cracks or will not stay shut, measure the opening in the wall and the visible outer flange separately. B&B Molders offers a standard-sized face, a larger deluxe face and versions with or without a rear back panel. The cord pass-through is intended for compatible 30- and 50-amp RV cables; it is not an electrical receptacle or an amperage converter.
Compare the round hatch versions
| Manufacturer number | Face diameter | Wall cutout | Configuration |
|---|---|---|---|
| 94328 | 4⅝ in | 3½ in | Standard polar-white round hatch |
| 94329 | 5⅛ in | 3½ in | Deluxe polar white, with back |
| 94330 | 5⅛ in | 3½ in | Deluxe black, with back |
| 94331 | 5⅛ in | 3½ in | Deluxe polar white, without back |
| 94332 | 5⅛ in | 3½ in | Deluxe black, without back |
3½-inch cutout
Exterior trim: 5⅛ inches on the deluxe models.
Wall opening: 3½ inches in diameter.
Rear depth: 2⅜-inch collar; also check whether the original has a back.
Identification diagram, not a scaled installation drawing.
Identify the important pieces
| Part of the hatch | What to compare |
|---|---|
| Outer flange / face | The visible round trim must cover the existing cutout and old fastener area. |
| Main access door and hinge | The deluxe design has a reinforced hinge; check swing clearance. |
| Smaller cord pass-through | This opening lets a compatible power cord exit while the main door remains closed. |
| Collar and rear housing | Check the 2⅜-inch rear collar clearance and whether the original hatch has a back or is open-backed. |
Deluxe hatches available at UsedRVParts
94330 — Deluxe round hatch — black
Black deluxe hatch with the same 3½-inch opening as 94329.
View 94330 productBefore ordering
- Measure the actual circular wall opening. All models in this comparison specify a 3½-inch opening.
- Check the existing outside trim diameter and how it overlaps the wall.
- Inspect the original rear configuration. A hatch without a back is not equivalent to a closed-back assembly.
- Match the finish, mounting clearance, cord pass-through and hinge direction.
- Follow the RV manufacturer's instructions for fastening and weather-sealing the exterior wall opening.
Manufacturer illustrations
Compare the original manufacturer drawings and part numbers in the B&B Molders round electrical cable hatch catalog (printed page 34).
If your opening is rectangular rather than circular, see the separate small and medium rectangular cord-hatch guide.
Visto recientemente
Inventario de piezas para vehículos recreativos nuevo y actualizado: consulte con frecuencia
Siempre estamos agregando piezas de RV nuevas y usadas a nuestro inventario, así que asegúrese de volver a consultarlo periódicamente.
Si no ve la pieza que necesita hoy, es posible que aún la tengamos en stock: nuestra base de datos interna incluye miles de piezas de vehículos recreativos nuevas que aún no están publicadas en línea.
Envíenos un mensaje de texto o correo electrónico con el número de producto o modelo y verificaremos la disponibilidad de inmediato.
Nuestros productos