{"product_id":"lenco-12-x-12-edge-mount-trim-tab-kit-w-15186107","title":"Lenco 12 x 12 Edge Mount Pro Control Auto Tabs 15186-107","description":"\u003cp\u003eThe brand-new \u003cstrong\u003eLenco 15186-107\u003c\/strong\u003e combines two low-mount Edge Mount trim tabs with a Pro Control Auto helm system. It suits installations where the height of a standard actuator bracket would be difficult to accommodate. Rather than relying solely on manual button presses, the supplied keypad and IMU work with the SD Pro actuators to adjust trim automatically on a properly installed system.\u003c\/p\u003e\u003ch2\u003eWhat makes it different?\u003c\/h2\u003e\u003cp\u003eEach 12 × 12-inch blade has raised edges for stiffness, and the actuator attaches closer to the trailing edge, reducing installation height by about 3 inches compared with a standard mount. This is the \u003cstrong\u003estandard-finish stainless\u003c\/strong\u003e version, not Lenco's separately numbered electro-polished option. Auto and Assist control packages are different: this set includes the motion-sensing IMU used for Auto levelling.\u003c\/p\u003e\u003ch2\u003eFit and measurements\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer number:\u003c\/strong\u003e 15186-107; stock SKU 15186107\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade pair:\u003c\/strong\u003e Two 12-inch-long × 12-inch-wide Edge Mount stainless trim planes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 12-gauge 304 stainless steel; 1-inch turned-up edges and 1\/8-inch hinge pins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive pair:\u003c\/strong\u003e Two SD Pro 15189-001 actuators, 11.5-inch pin spacing and 2.25-inch travel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended boat size:\u003c\/strong\u003e 17–30 feet, subject to hull and transom layout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransom clearance:\u003c\/strong\u003e At least approximately 11 inches, with 2-inch hinge height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical setup:\u003c\/strong\u003e 12-volt Lenco Pro Control Auto\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eComponents included\u003c\/h2\u003e\u003cp\u003eLenco lists a Pro Control Auto keypad (15174-107), IMU (15180-001), two stainless blades, two SD Pro actuators with 6-foot Deutsch leads, two upper brackets with gland seals and two lower brackets. The network package also contains a Lenco 2K backbone, fused Micro-C power lead, six tees, two 6-foot Micro-C drops plus 15-foot and 25-foot drops, two Deutsch-to-Micro-C adapters, two 3-foot power pigtails and two non-Mercury wake-signal adapters.\u003c\/p\u003e\u003ch2\u003eChoosing the correct kit\u003c\/h2\u003e\u003cp\u003eConfirm that the transom provides the required clearance and that the boat's steering-station wiring, engine wake-signal interface and tab locations suit Pro Control Auto. This is \u003cstrong\u003e15186-107 standard finish\u003c\/strong\u003e; it should not be substituted with the manual 15185-106 Assist kit, conventional 100 Series tabs or electro-polished 15215-107. Check installed hull hardware and installation clearances before ordering.\u003c\/p\u003e","brand":"Lenco","offers":[{"title":"Default Title","offer_id":51053901185210,"sku":"15186107","price":2479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/4958\/3802\/files\/lenco-15186-107-12inch-edge-mount-auto-trim-kit-manufacturer.png?v=1795130769","url":"https:\/\/usedrvparts.ca\/es\/products\/lenco-12-x-12-edge-mount-trim-tab-kit-w-15186107","provider":"Okanagan RV Parts","version":"1.0","type":"link"}